Mazda6 Performance Parts : Suspension Spring Sets

 : Suspension - Spring Sets : Spring Set 03-08 Mazda6 V6

Spring Set
03-08 Mazda6 V6

Part Number: 70018

Price: $213.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Spring Set
03-08 Mazda6 V6

Mazda 6s Suspension Springs - 3.0 liter V6 Engine -Sedan & Hatchback Models - Complete Set of Four (4) - Front & Rear

Over the years, Racing Beat has designed suspension coil springs that are suitable for a variety of street, autocross, and Solo applications. For the Mazda 6s application, our springs interchange exactly with the stock springs and can be used for both street or track applications. These springs have been designed with a modest rate increase of 20%, and a front and rear ride height drop of .75-inch.

Jim Mederer, Racing Beat's co-founder and chief engineer, offers the following insight to Racing Beat's philosophy on suspension spring development:

"Springs are very much a mater of opinion, we adjust ride height and spring rate based more than any other thing on our personal opinion. We won't "slam", or excessively lower a car strictly for appearance sake. First the car will hit the bump rubbers far too often and that makes the car unpredictable in its handling, also it offers a jarring ride and it is very harsh on suspension components causing them to potentially fail. We therefore make relatively small changes in ride height, usually less than 1". We adjust that based in part on what we perceive the best way of adjusting for good handling. Our primary goal in lowering the car is handling, and from our point a view, improved appearance is a side benefit. We don't lower the car for appearance, and then take what comes in handling. We are very cautious to not excessively lower the car such that it will cause perceived problems either in safety or unreasonable changes in ride comfort."

Finished with a brilliant Racing Beat Red powder-coat paint, these springs for the Mazda 6 application will offer the motoring enthusiast years of handling performance.

Note: All lowering figures are approximate. Actual lowering height may vary slightly from vehicle to vehicle and can be affected by differing OEM equipment packages and the installation of optional equipment.

Customers who bought the above item also often bought:

Sway Bar - Rear - 03-08 Mazda 6 - All Models Except MazdaSpeed6

Sway Bar - Rear - 03-08 Mazda 6 - All Models Except MazdaSpeed6

Designed as a "partner" for the Racing Beat front sway bar, our Racing Beat solid rear sway bar for the 03-08 Mazda 3 has been designed to function with the front sway bar to reduce chassis roll while turning. All Racing Beat sway bars are... Sway Bar - Rear - 03-08 Mazda 6 - All Models Except MazdaSpeed6

Sway Bar Endlinks - 03-08 Mazda 6 Rear

Sway Bar Endlinks - 03-08 Mazda 6 Rear

Rear Sway Bar End Links (Sold Per Pair) All models - Including MazdaSpeed - The addition of a larger aftermarket rear sway bar on the Mazda 6 can increase the stress loads on the original OEM sway bar end links. After receiving feedback about stock... Sway Bar Endlinks - 03-08 Mazda 6 Rear

Sway Bar - Front - 03-08 Mazda 6 (except 06-08 V6)

Sway Bar - Front - 03-08 Mazda 6 (except 06-08 V6)

Mazda 6 Front Sway Bar - 2003-2008 4-Cylinder Models, MazdaSpeed 6 & 2003-05 V6 Models (Except 2006-08 3.0 V6 models) - Racing Beat-designed Mazda 6 sway bars reduce chassis roll in turns and increase your car's sensitivity to steering... Sway Bar - Front - 03-08 Mazda 6 (except 06-08 V6)

Exedy Stage 1 Kit - 03-07 Mazda 6 V-6

Exedy Stage 1 Kit - 03-07 Mazda 6 V-6

Applications: 2003-07 Mazda 6 3.0L V-6 (AJV)(PN 10808) Recommended Use: Street or Autocross - excellent for daily-driven cars, track-days, or autocross use.

This complete Exedy kit is ideally suited for street or lightly modified Mazda 6,... Exedy Stage 1 Kit - 03-07 Mazda 6 V-6

Go to Racing Beat Home Page
Select: Go to Shopping Cart