Hawk Racing Brake Pads -Blue - 1994-02 Miata - Front Set (Standard Non-sport Brakes*) (HB 149E.505) - This Hawk compound is recommended for sprint racing and short endurance events. Should not be used for street or Autocross applications. Temperature range 250-1000F.
Hawk recommends if another brand of carbon pad has been used on rotors previously, before using any Hawk compound pads, resurface or replace the rotors. For best results, Hawk recommends that the new rotors be burnished with used Hawk pads.
<
| Hawk Street Brake Pads |
Hawk Racing Pads |
High Performance Street (HPS)
- Very low brake dust
- High friction/torque hot or cold
- Virtually noise free
- Long rotor life
- Much improved performance over OEM Pads
- Long pad life
|
Racing Only - Black
- Medium torque compound
- Good, all purpose racing pad
- Better pedal modulation than Blue pads
- Temp range: 100-900 F
|
Street & Track - HP Plus
- Very high friction output
- Streetable pad
- Well suited for Autocross & track day events
- Modest noise and dust
- Increased rotor wear versus HPS pads
|
|
Hawk recommends if another brand of carbon pad has been used on rotors previously, before using any Hawk compound pads, resurface or replace the rotors. For best results, Hawk recommends that the new rotors be burnished with used Hawk pads.
Use of these or any high-coefficient/high temperature pads will, over a period of use, create "heat checks" or small cracks in the rotor surface. These generally will occur only on the front rotors. These cracks should be monitored on a regular basis as they will eventually widen and/or extend toward the rotors outer edge. Cars without brake ducting (i.e., showroom stock) may see this process occur even faster. With continued use, heat checked rotors could shatter. Heat checked rotors should be replaced before cracks reach approximately 1-inch from rotor edge (or if cracks grow excessively).
For racing applications where a rear lock-up problem exists, we recommend the use of a brake bias adjuster. Without a bias adjuster, another way to reduce rear lock-up is to use a lower coefficient compound in the rear. For example, use a Hawk BLUE compound in the front and the Black or HP Plus compound in the rear.
*Fitting Information
All 1994-00 Miatas are equipped with standard (10.0" front/9.9" rear) disc brakes. For the 2001-2002 model year, Mazda offered a larger Sport brake package (10.6" front/10.9" rear)
