1990-2005 Mazda Miata Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Trans Seal and  Gasket Kit -5 Speed 90-05 Miata

Trans Seal and Gasket Kit -5 Speed
90-05 Miata

Part Number: 52036

Price: $34.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Trans Seal and Gasket Kit -5 Speed
90-05 Miata

Transmission Seal and Gasket Kit 1990-05 (5-Speed transmission) - We offer a seal and gasket kit to reduce the likelihood of front or rear seal leakage after transmission re-installment. Our experience has shown that once a transmission has been removed and re-installed, the possibility of transmission oil leakage from either seal increases: the original seals can become distorted from the jarring of the input and output shafts. Replacing the old seals with the new ones is an effective and inexpensive insurance against leakage. The kit includes Mazda OE components - one (1) front cover gasket, one (1) front oil seal, and one (1) rear oil seal.

Genuine Mazda PartGenuine Mazda Part.

Customers who bought the above item also often bought:

Stainless Steel Clutch Line - 93-95 RX-7 / 90-97 Miata

Stainless Steel Clutch Line - 93-95 RX-7 / 90-97 Miata

Replace the original rubber clutch line on your 1993-95 RX-7 chassis with an upgraded braided stainless steel line. Can be used for both street and race applications.

Stainless Steel Clutch Line - 93-95 RX-7 / 90-97 Miata

Exedy Stage 1 Clutch Kit - 90-93 Miata

Exedy Stage 1 Clutch Kit - 90-93 Miata

This complete Exedy Stage 1 Miata Clutch Kit (10804) for the 1990-93 Miata 1.6L (B6-ZE) includes a sprung hub, organic compound clutch disc, upgraded pressure plate, replacement throwout bearing, pilot bearing, and a clutch installation alignment... Exedy Stage 1 Clutch Kit - 90-93 Miata

Mazda Clutch Throwout Bearing - 90-05 Miata (All)

Mazda Clutch Throwout Bearing - 90-05 Miata (All)

Normally, a throwout bearing does not require replacement unless it has been "abused" or is noisy during clutch engagement and/or disengagement. If there is any roughness during inspection, this is good cause for replacement. From... Mazda Clutch Throwout Bearing - 90-05 Miata (All)

Competition Engine Mount - 90-05 Miata

Competition Engine Mount - 90-05 Miata

We offer the Mazda Competition Miata engine mount for use in high performance and racing applications. Although this is dimensionally the same mount as the standard OE engine mount, the rubber in this mount is approximately 40% stiffer. Sold... Competition Engine Mount - 90-05 Miata

Go to Racing Beat Home Page
Select: Go to Shopping Cart