1990-2005 Mazda Miata Performance Parts : Ignition

 : Ignition : ULTRA Ignition Wires 1990-00 Miata

ULTRA Ignition Wires
1990-00 Miata

Part Number: 51003

Price: $105.00

Qty:

ULTRA Ignition Wires - 1990-00 Miata - Detail 1ULTRA Ignition Wires - 1990-00 Miata - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

ULTRA Ignition Wires
1990-00 Miata

Spark Plug Wire Set - 1990-2000 Miata
Racing Beat's ULTRA 8mm Red Hot Ignition Wire Sets for the 1990-2000 Miata utilize silicone rubber for both the 8mm wire insulation and boots, with a minimum rating of 100,000 volts in all areas.

Hand-assembled by Racing Beat
Racing Beat has been hand-assembling each ULTRA wire set in our California production shop for decades. Each wire starts from a continuous roll of 8mm silicone wire and is machine-cut and stripped to the exact length. Next, wire terminal ends are hydraulically crimped to each wire end, and the selected boot is then wound onto each threaded end of the each wire terminal. Each wire is tested for continuity and specific resistance before packaging.

Specifications
The "Made In Japan" ULTRA silicone rubber is designed to withstand continuous temperatures ranging from -60 degrees F to +480 degrees F. Brass "screw-together" connectors are double-crimped onto the zinc-clad, stranded copper wire ends to provide absolute contact with no possibility of deterioration. The silicone boots seal watertight at the spark plugs and ignition coil for added protection. A unique design feature seals a wire wound resistor inside the spark plug terminal to optimize noise suppression and power.

These are the wires that Miata Magazine tested in the February 2000 issue. As stated, "The preferred choice for performance was the Racing Beat wires. On a dyno, the wires actually provided 1.5 horsepower. In addition, the acceleration and engine response was crisper than the other wires."

To obtain maximum horsepower gains, while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires.

Assembled in the USA by Racing Beat, Inc.Assembled in the USA by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Spark Plug - NGK Iridium  - Miata/Protege

Spark Plug - NGK Iridium - Miata/Protege

The NGK Iridium spark plugs (BKR5EIX-11) are an excellent upgrade over the stock plugs.  Designed specifically for the performance enthusiast, these Iridium spark plugs offer superior performance, improved throttle response and superior... Spark Plug - NGK Iridium  - Miata/Protege

High Flow Air Intake Kit - 94-97 Miata

High Flow Air Intake Kit - 94-97 Miata

Special Offer: If you order this product directly from Racing Beat you will also receive a FREE K&N Filter Recharger Kit. This all-in-one maintenance kit is designed to clean and re-oil your K&N filter. Take advantage of this offer and we'll... High Flow Air Intake Kit - 94-97 Miata

Spark Plugs - NGK V-Power - Miata/Protege

Spark Plugs - NGK V-Power - Miata/Protege

We've been using and recommending NGK spark plugs for many years with excellent results. For the Miata and Protege we stock the factory-recommended replacement NGK V-Power Spark Plugs (BKR5E-11). NGK V-Power plugs offer economical performance for all... Spark Plugs - NGK V-Power - Miata/Protege

Sway Bar - Tubular - Front - 94-97 Miata

Sway Bar - Tubular - Front - 94-97 Miata

Racing Beat's front tubular sway bars for the 1990-97 Miata applications offer you the ability to further tune your suspension to match additional suspension upgrades or to suit your particular driving style. Rated at 1.3x stronger than our Racing... Sway Bar - Tubular - Front - 94-97 Miata

Go to Racing Beat Home Page
Select: Go to Shopping Cart