1990-2005 Mazda Miata Performance Parts : Suspension Spring Sets

 : Suspension - Spring Sets : Suspension Spring Set 99-00 Miata

Suspension Spring Set
99-00 Miata

Part Number: 54084

Price: $189.00

Qty:

Suspension Spring Set - 99-00 Miata - Detail 1Suspension Spring Set - 99-00 Miata - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

Suspension Spring Set
99-00 Miata

Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs for the 1999-2000 Miata were designed specifically for the Miata by Racing Beat's engineering staff. Ideally suited for use with either the stock Mazda shocks, or your favorite aftermarket units, these springs interchange exactly with the stock springs.

These springs have been designed with a rate increase of approximately 21% (front - 195 lb/in) and 30% (rear - 145 lb/in) with a modest drop of 1-inch (front) and .75-inch (rear). (As compared to a Miata equipped with a manual transmission and non-sport suspension.) For information on the correct method to shorten the "bump rubbers" when installing these springs, click here.

If your car is still running on the original shocks, it is certainly time to consider a replacement! We do not suggest installing aftermarket performance-based springs on a set of tired high mileage shocks, as this may produce a "springy" and bouncy ride. If you prefer to keep the ride quality of your car more "stock like", you may wish to replace your old shocks with a set of Mazda units, or an equivalent set of aftermarket OEM style replacements. However, if you wish to noticeably improve the handling performance of your car, combine a set of new springs with a set of aftermarket Tokico, Koni, or KYB performance shocks. Although the ride quality will become noticeably firmer, the handling improvements will be a much-welcomed improvement.

These springs are available separately for replacement or special applications: Front Springs & Rear Springs

Price shown is for a complete set of four (4) springs.

Customers who bought the above item also often bought:

Suspension Spring Set - 94-97 Miata

Suspension Spring Set - 94-97 Miata

Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs for the 1994-97 Miata were designed specifically for the Miata by Racing Beat's engineering staff.... Suspension Spring Set - 94-97 Miata

Sport Connecting Pipe - 90-95 Miata

Sport Connecting Pipe - 90-95 Miata

For Miata owners that prefer a more aggressive sounding and lighter weight exhaust system, the Sport Connecting Pipe can be used with our Power Pulse Muffler. Unlike the connecting pipe that that is intended to accompany the Power Pulse Muffler, the... Sport Connecting Pipe - 90-95 Miata

Power Pulse Muffler - 90-97 Miata

Power Pulse Muffler - 90-97 Miata

Designed and manufactured by Racing Beat, our Power Pulse Muffler is intended for use on all 1990-1997 Miatas. The heart of our Power Pulse Exhaust System is our polished 304-stainless steel muffler canister. This polished canister is equipped with... Power Pulse Muffler - 90-97 Miata

ULTRA Ignition Wires - 01-05 Miata/01-03 Protege 2.0L

ULTRA Ignition Wires - 01-05 Miata/01-03 Protege 2.0L

The Racing Beat ULTRA 7mm Red Hot Ignition Wire Sets for the 2001-2005 Miata and the 2001-2003 2.0 L Protege utilize silicone rubber for both the 7mm wire insulation and boots, with a minimum rating of 100,000 volts in all areas. The silicone rubber... ULTRA Ignition Wires - 01-05 Miata/01-03 Protege 2.0L

Go to Racing Beat Home Page
Select: Go to Shopping Cart