1990-2005 Mazda Miata Performance Parts : Suspension Sway Bars

 : Suspension - Sway Bars : Sway Bar Mount Brace Kit 90-95 Miata with power steering

Sway Bar Mount Brace Kit
90-95 Miata with power steering

Part Number: 54123

Price: $40.00

Qty:

Sway Bar Mount Brace Kit - 90-95 Miata with power steering - Detail 1Sway Bar Mount Brace Kit - 90-95 Miata with power steering - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

Sway Bar Mount Brace Kit
90-95 Miata with power steering

Sway Bar Mount WITHOUT Bracing

Sway Bar Mount WITH Bracing

Sway Bar Mount Brace Kit
1990-95 Miata with power steering

In various racing classes (Autocross - Stock and C-Street Prepared) the use of the actual Racing Beat Sway Bar Brace component is not allowed. However, the use of the brace kit hardware components that add bracing to the stock sway bar pedestal mounts are allowed. (We suggest you refer to your specific class regulations for current rules.) This combination of extended sway bar mounting bolts and CNC-machined aluminum distribution blocks are used to pre-load the stock sway bar mounts, offering critical reinforcement to the mounts while providing an inexpensive form of insurance against possible breakage of these hard-to-replace mounts.

For 1990-95 Miata's equipped with power steering we provide a channeled supporting block to allow clearance for the chassis-mounted power steering line.

Refer to the video links to the right. While watching the TOP video you'll notice during the autocross run that the stock mounting bracket flexes and bends during cornering and compression. This repeated flexing and bending will eventually fatique the stock mount and may cause the mount to crack and fail. After the installation of the reinforcement kit, as seen in the BOTTOM video, noticable flex and movement has been effectively minimized.

For 1990-95 Miata's equipped with power steering we provide a channeled supporting block to provide clearance under the power steering line.

Made in the USAMade in the USA by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Sway Bar End Links - 90-97 Miata Front or Rear

Sway Bar End Links - 90-97 Miata Front or Rear

Racing Beat Sway Bar End Links 1990-1997 Miata Front  Our popular Racing Beat-designed Miata sway bar end links are a direct swap with the Miata factory links for all 1990-1997 Miatas (front and rear) and provide the ability to set either front... Sway Bar End Links - 90-97 Miata Front or Rear

Sway Bar - Race Tubular - Front - 90-97 Miata

Sway Bar - Race Tubular - Front - 90-97 Miata

1990-97 Miata Front Sway Bar - Race - Tubular Originally developed for use in the SCCA STS autocross class, this Miata tubular sway bar offers you the ability to further tune your suspension to match additional suspension upgrades or to suit your... Sway Bar - Race Tubular - Front - 90-97 Miata

Sway Bar - Tubular - Front - 90-93 Miata

Sway Bar - Tubular - Front - 90-93 Miata

Racing Beat's front tubular sway bars for the 1990-97 Miata applications offer you the ability to further tune your suspension to match additional suspension upgrades or to suit your particular driving style. Rated at 1.3x stronger than our Racing... Sway Bar - Tubular - Front - 90-93 Miata

Sway Bar - Solid - Rear - 90-00 Miata

Sway Bar - Solid - Rear - 90-00 Miata

The Racing Beat solid Miata rear sway bar is ideally matched to perform with our wide selection of front sway bars. While the Racing Beat solid rear bar can be fitted on any 1990-2005 Miata application, we do not recommend the use of this bar on the... Sway Bar - Solid - Rear - 90-00 Miata

Go to Racing Beat Home Page
Select: Go to Shopping Cart