1990-2005 Mazda Miata Performance Parts : Suspension Sway Bars

 : Suspension - Sway Bars : Sway Bar End Links 90-97 Miata Front & Rear

Sway Bar End Links
90-97 Miata Front & Rear

Part Number: 54200

Price: $67.00

Qty:

Sway Bar End Links - 90-97 Miata Front & Rear - Detail 1Sway Bar End Links - 90-97 Miata Front & Rear - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

Sway Bar End Links
90-97 Miata Front & Rear

Application: 1990-1997 Miata Front - Our popular Racing Beat-designed Miata sway bar end links are a direct swap with the Miata factory links for all 1990-1997 Miatas (front and rear) and provide the performance enthusiast the ability to set either front or rear Miata sway bars to a "neutral position" while the chassis is at ride height to avoid pre-loading of the bar. The experienced enthusiast may wish to purposely "pre-load" the sway bar to create a specific handling characteristic to induce either a mild understeer or oversteer condition.

Although the stock end links were well suited for use with the original Miata sway bar, installation of a stronger, stiffer aftermarket Miata sway bar may accelerate the end link wear. This is particularly true if you're still using the tired, old factory installed units.

The Racing Beat sway bar end links feature CNC-machined aluminum end housings and are fitted with urethane bushings to further reduce flexing - as compared to softer stock rubber bushing links. The end link mounting sleeve is fabricated from 4130 chrome moly steel tubing, then heat-treated during the manufacturing process  to ensure superior strength and longevity. We prefer the use of our design as compared to the commonly used Heim-joint design due to the slightly more forgiving nature of the urethane components used. The urethane bushing material absorbs road vibration and harshness as compared with more rigid and unforgiving Heim-joint ball style ends. If you use your car as a daily-driven vehicle, in the long run we believe you'll appreciate the Racing Beat end links.

Each set contains two (2) complete end links to serve one (1) sway bar. These end links have been designed for use on the Mazda stock bar, all Racing Beat sway bars, and comparable aftermarket bars.

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Sway Bar - Solid - Rear - 90-00 Miata

Sway Bar - Solid - Rear - 90-00 Miata

Racing Beat Sway Bars - Production

The Racing Beat solid Miata rear sway bar is ideally matched to perform with our wide selection of front sway bars. While the Racing Beat solid rear bar can be fitted on any... Sway Bar - Solid - Rear - 90-00 Miata

Sway Bar - Race Tubular - Front - 90-97 Miata

Sway Bar - Race Tubular - Front - 90-97 Miata

Originally developed for use in the SCCA STS autocross class, this tubular bar offers you the ability to further tune your suspension to match additional suspension upgrades or to suit your particular driving... Sway Bar - Race Tubular - Front - 90-97 Miata

Sway Bar - Tubular - Front - 90-93 Miata

Sway Bar - Tubular - Front - 90-93 Miata

Racing Beat's front tubular sway bars for the 1990-97 Miata applications offer you the ability to further tune your suspension to match additional suspension upgrades or to suit your particular driving style. Rated at 1.3x stronger than our Racing... Sway Bar - Tubular - Front - 90-93 Miata

Sway Bar Brace Kit Hardware - 90-05

Sway Bar Brace Kit Hardware - 90-05

Racing Beat Brace Kit Hardware

In various racing classes (Autocross - Stock and C-Street Prepared) the use of the actual Racing Beat Sway Bar Brace component is not allowed. However, the use of the brace kit... Sway Bar Brace Kit Hardware - 90-05

Go to Racing Beat Home Page
Select: Go to Shopping Cart