2006-2019 Mazda MX-5 Performance Parts : Exhaust Gaskets

 : Exhaust - Gaskets : Swivel Gasket  Multi-application

Swivel Gasket
Multi-application

Part Number: 16336

Price: $17.00

Qty:

Swivel Gasket  - Multi-application - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Swivel Gasket
Multi-application

Swivel Connection Ring Gasket - This replacement gasket is used on Mazda's OE style flanges that incorporate a swivel-style pipe exhaust pipe connection. These joints are typically found at the outlet end of the stock exhaust manifold or downpipe section, just behind the primary catalytic converter section. These connections incorporate a series of mounting studs and retaining springs which allow the two pipe sections to pivot and flex with the movement of the engine or chassis.

This replacement gasket can be used in place of the stock Mazda gasket. While these gaskets sell for over $45.00 from your local dealer, we offer the exact same component at a much reduced price. While these gaskets should last many years, these gaskets may become difficult to remove during an exhaust upgrade project and damage to the brittle gasket material may occur. Comparable to Mazda Part Number: L315-40-581

Application Chart

  03 04 05 06 07 08 09 10 11 12 13 14
MazdaSpeed3         x x x x x x x  
Mazda6* x x x x x x x x x x x  
Mazdaspeed6       x x              
RX-8   x x x x x x x x x x x
Miata       x x x x x x x x x

*Exhaust manifold oultet flange position.

Prop65Warning

Customers who bought the above item also often bought:

Exhaust Gasket - Donut Style - RX-8 Header/Race Pipe

Exhaust Gasket - Donut Style - RX-8 Header/Race Pipe

flange-gasket-guide.pdf This donut style gasket is intended for use on the outlet of the stock RX-8 exhaust manifold or a Racing Beat RX-8 header. (This gasket is also supplied with the Racing Beat RX-8 catalytic converter... Exhaust Gasket - Donut Style - RX-8 Header/Race Pipe

Exhaust Gasket - Donut Style - RX-8/MazdaSpeed3

Exhaust Gasket - Donut Style - RX-8/MazdaSpeed3

flange-gasket-guide.pdf This donut style exhaust gasket can be used on Racing Beat RX-8 and MazdaSpeed 3 exhaust systems. This gasket is not intended for use on the stock exhaust system. This gasket is used on the following connections... Exhaust Gasket - Donut Style - RX-8/MazdaSpeed3

REN.V2 Race Pipe - 04-11 RX-8

REN.V2 Race Pipe - 04-11 RX-8

Racing Beat REN.V2 RX-8 Race Pipe Resonated Catalytic Converter Replacement Race Pipe - RX-8 owners have discovered that a installing a non-resonated catalytic converter race pipe on a RX-8 can produce a surprising loud exhaust tone. If your racing... REN.V2 Race Pipe - 04-11 RX-8

Engine-to-Header Gasket - 04-11 RX-8 Renesis - 6 Port

Engine-to-Header Gasket - 04-11 RX-8 Renesis - 6 Port

Engine-to-Header Gasket - 2004-13 13B Renesis Engine - This gasket is required to mount a header or exhaust manifold to a High Power, 6 Port, Renesis 13B rotary engine. Engine-to-Header Gasket - 04-11 RX-8 Renesis - 6 Port

Go to Racing Beat Home Page
Select: Go to Shopping Cart