These genuine Mazda exhaust hangers (LF46-40-061) can be used to replace the old, worn original rubber hangers on your MX-5. If you are installing a new exhaust system it is worth considering the replacement of the original hangers to ensure that your new exhaust system is correctly positioned on your chassis.
Refer to the diagram above to determine the correct number of hangers (pink) required for your application.
- Muffler Section - Two (2) hangers are required in the positions shown on the diagram. Two (2) additional hangers are required as shown by Mazda part number N3H2-40-061A. Note the position of these hangers!!