2006-2016 Mazda MX-5 Performance Parts : Suspension Shocks

 : Suspension - Shocks : Koni Sport Shock - Front 06-13 MX-5

Koni Sport Shock - Front
06-13 MX-5

RB Part Number: 54041

8241 1243 Sport

Price: $165.00


Koni Sport Shock - Front - 06-13 MX-5 - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Koni Sport Shock - Front
06-13 MX-5

We offer the KONI Sport Series (8241 1243 Sport) of externally adjustable front shock absorbers for the Mazda MX-5 Miata enthusiast desiring both improved road holding performance. These gas-filled twin-tube, low-pressure MX-5 Koni shocks include a large removable knob that allows for quick, simple "dialed in" adjustments. Koni's have long been a favorite of Racing Beat; we've used them on every race vehicle that we've built over the years! If you're looking for serious performance from your shocks while still maintaining a reasonable street-ride quality, place Koni at the top of your list! Backed by Koni's limited-lifetime warranty to the original purchaser against defects in workmanship for as long as you own the car and it's registered for street use.

What is the best adjustment setting for your new shocks? We're often asked where the "correct" position is to set your initial adjustment. We've discovered that there is no single best adjustment setting for your Koni's because every driver has different preferences for comfort and performance based upon many factors. For most vehicles, KONI suggests that new shocks be installed in the full soft position (the standard setting right out of the box) to take advantage of the balance of ride comfort and handling designed by the KONI ride development engineers. If the car has performance upgrades (springs, wheel/tire packages, etc.) or the driver wants the car a bit more aggressive, most people find the optimum setting in the 1/2 to one full turn from the full soft range.

Important note: Although these Koni's are the same length as the factory units, installation of these twin tube shocks in place of the factory mono-tube high-pressure shocks may result in an approx 1/4"-1/2" lowering effect due to the lower gas pressures of these replacement shocks. Be sure and factor this additional lowering measurement when selecting a set of aftermarket springs!

Compatible with all MX-5 models, including Bilstein equipped cars. Price listed is for one (1) Koni shock. (Koni shocks are packaged and sold in pairs only.)

Go to Racing Beat Home Page
Select: Go to Shopping Cart