Mazda Protege Performance Parts : Ignition

Mazda Protege Performance Parts : Ignition : ULTRA Ignition Wires 01-05 Miata/01-03 Protege 2.0L

ULTRA Ignition Wires
01-05 Miata/01-03 Protege 2.0L

Part Number: 51007

Price: $79.00

Qty:

ULTRA Ignition Wires - 01-05 Miata/01-03 Protege 2.0L - Detail 1ULTRA Ignition Wires - 01-05 Miata/01-03 Protege 2.0L - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

ULTRA Ignition Wires
01-05 Miata/01-03 Protege 2.0L

The Racing Beat ULTRA 7mm Red Hot Ignition Wire Sets for the 2001-2005 Miata and the 2001-2003 2.0 L Protege utilize silicone rubber for both the 7mm wire insulation and boots, with a minimum rating of 100,000 volts in all areas. The silicone rubber is designed to withstand continuous temperatures ranging from -60 degrees F to +480 degrees F. Brass "screw-together" connectors are double-crimped onto the zinc-clad, stranded copper wire ends to provide absolute contact with no possibility of deterioration. The silicone boots seal watertight at the spark plugs and ignition coil for added protection. A unique design feature seals a wire wound resistor inside the spark plug terminal to optimize noise suppression and power.

With the release of the 2001 Miata and the 2001 Protege, Mazda incorporated "igniter" units into the ignition system design. The use of these igniters eliminates the need for a traditional 4-wire spark plug wire replacement set. This new design positions an igniter above one spark plug, with a traditional plug wire connecting the short distance to an adjacent spark plug. There are two igniters, and two wires in this arrangement. (See photo.)

So why offer a spark plug wire replacement set for two very short wires? Our initial research found that there were significant resistance differences between these stock wires. We fabricated a set of ULTRA wires and installed them on a special project Miata that we were working on. While undertaking a series of dyno tests during a header test session, we conducted some back-to-back testing with the ULTRA and stock wires and noticed a very slight .5-1 HP gain with the ULTRA wires. Now these aren't the most pavement shaking gains we've ever measured, but they were gains nonetheless!

To obtain maximum horsepower gains, while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 7mm Street Ignition Wires.

Assembled in the USA by Racing Beat, Inc.Assembled in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Suspension Spring Set - 94-97 Miata

Suspension Spring Set - 94-97 Miata

Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs for the 1994-97 Miata were designed specifically for the Miata by Racing Beat's engineering staff.... Suspension Spring Set - 94-97 Miata

Spark Plugs - NGK V-Power - Miata/Protege

Spark Plugs - NGK V-Power - Miata/Protege

We've been using and recommending NGK spark plugs for many years with excellent results. For the Miata and Protege we stock the factory-recommended replacement NGK V-Power Spark Plugs (BKR5E-11). NGK V-Power plugs offer economical performance for... Spark Plugs - NGK V-Power - Miata/Protege

Spark Plug - NGK Iridium  - Miata/Protege

Spark Plug - NGK Iridium - Miata/Protege

The NGK Iridium spark plugs (BKR5EIX-11) are an excellent upgrade over the stock plugs.  Designed specifically for the performance enthusiast, these Iridium spark plugs offer superior performance, improved throttle response and superior... Spark Plug - NGK Iridium  - Miata/Protege

Sport Connecting Pipe - 90-95 Miata

Sport Connecting Pipe - 90-95 Miata

For Miata owners that prefer a more aggressive sounding and lighter weight exhaust system, the Sport Connecting Pipe can be used with our Power Pulse Muffler. Unlike the connecting pipe that that is intended to accompany the Power Pulse Muffler, the... Sport Connecting Pipe - 90-95 Miata

Go to Racing Beat Home Page
Select: Go to Shopping Cart