Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Transmission Seal Kit 74-78 Trans (All)

Transmission Seal Kit
74-78 Trans (All)

Part Number: 12035

Price: $20.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Transmission Seal Kit
74-78 Trans (All)

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing the transmission, when it is common to have to hang the transmission on the input shaft at some point disturbing the seal. Hence, replacing the seals during re-installation is a wise idea. (Gasket included where applicable.)

Genuine Mazda PartGenuine Mazda Part.

Customers who bought the above item also often bought:

Transmission Throwout Bearing - Pre-79 12A & 13B

Transmission Throwout Bearing - Pre-79 12A & 13B

The Transmission Throwout Bearing Retaining Spring is required to secure the throwout bearing on pre 1979 12A & 13B applications. Transmission Throwout Bearing - Pre-79 12A & 13B

Oil Hose Adapter Fitting - 18MM to -10 Hose

Oil Hose Adapter Fitting - 18MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 18mm female metric threads in the rear housing to accept -10 hose ends. Additionally, these 18mm female fittings also fit the... Oil Hose Adapter Fitting - 18MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the front cover (1971-95 rotary engines) and oil cooler (1971-85 stock or factory race) to accept -10... Oil Hose Adapter Fitting - 16MM to -10 Hose

Type I Modified Stationary Gear - 13B Rear-Groove

Type I Modified Stationary Gear - 13B Rear-Groove

Our Racing Beat Type I Modified 13B Rear (Special-Grooved) Stationary Gears are strongly recommended for engines which are regularly running near or above 8,500 RPM. These gears have had several machining modifications performed, as well as... Type I Modified Stationary Gear - 13B Rear-Groove

Go to Racing Beat Home Page
Select: Go to Shopping Cart