Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Transmission Seal Kit 74-78 Trans (All)

Transmission Seal Kit
74-78 Trans (All)

Part Number: 12035

Price: $20.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Transmission Seal Kit
74-78 Trans (All)

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing the transmission, when it is common to have to hang the transmission on the input shaft at some point disturbing the seal. Hence, replacing the seals during re-installation is a wise idea. (Gasket included where applicable.)

Genuine Mazda PartGenuine Mazda Part.

Customers who bought the above item also often bought:

Oil Hose Adapter Fitting - 18MM to -10 Hose

Oil Hose Adapter Fitting - 18MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 18mm female metric threads in the rear housing to accept -10 hose ends. Additionally, these 18mm female fittings also fit the... Oil Hose Adapter Fitting - 18MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the front cover (1971-95 rotary engines) and oil cooler (1971-85 stock or factory race) to accept -10... Oil Hose Adapter Fitting - 16MM to -10 Hose

Air Control/Check Valve - Cover Plate - 79-80 RX-7

Air Control/Check Valve - Cover Plate - 79-80 RX-7

Air Control and Check Valve Cover Plate - 1979-80 RX-7 - This plate will cover the opening that remains when the air control and check valve is removed from the side of the stock intake manifold to prepare the engine for racing... Air Control/Check Valve - Cover Plate - 79-80 RX-7

Transmission Throwout Bearing - Pre-79 12A & 13B

Transmission Throwout Bearing - Pre-79 12A & 13B

The Transmission Throwout Bearing Retaining Spring is required to secure the throwout bearing on pre 1979 12A & 13B applications. Transmission Throwout Bearing - Pre-79 12A & 13B

Go to Racing Beat Home Page
Select: Go to Shopping Cart