Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Street/Strip HD Clutch Disc 71-82 12A & 13B - 215mm

Street/Strip HD Clutch Disc
71-82 12A & 13B - 215mm

Part Number: 12509

Price: $145.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Street/Strip HD Clutch Disc
71-82 12A & 13B - 215mm

The 215mm Street/Strip HD (Heavy Duty) Disc for all 1971-82 12A & 13B Applications (except Rotary Pick-Up) is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the clutch plate. The result is a disc that engages quicker (requiring a bit more technique when starting) and releases quicker (making life easier for the transmission synchros). This disc is well suited for high output street engines and interchanges exactly with the stock disc. It can be used with either a stock pressure plate or our Street/Strip Pressure Plate. As with all of our products, it is built only from new parts.

Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Transmission Seal Kit - 79-88 Non-Turbo

Transmission Seal Kit - 79-88 Non-Turbo

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing... Transmission Seal Kit - 79-88 Non-Turbo

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Street Pressure Plate  - 79-82 RX-7 12A - 215mm

Street Pressure Plate - 79-82 RX-7 12A - 215mm

The Exedy Street Pressure Plate, intended for the 1979-82 RX-7 12A & 13B RX-7 chassis, is designed as a Mazda OE replacement for street applications. This RX-7re plate, and can be used with the 215mm stock disc or any equivalent replacement... Street Pressure Plate  - 79-82 RX-7 12A - 215mm

Competition Transmission Mount - 79-85 RX-7

Competition Transmission Mount - 79-85 RX-7

We offer the Mazda Competition Parts Department competition transmission mount for the 1979-85 RX-7 (all models). This mount features rubber material that is approximately 40% stiffer than the stock mount. One required.

Competition Transmission Mount - 79-85 RX-7

Go to Racing Beat Home Page
Select: Go to Shopping Cart