Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Race Disc - 4 Puck 83-92 RX-7 Non-Turbo

Race Disc - 4 Puck
83-92 RX-7 Non-Turbo

Part Number: 12522

Price: $111.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Race Disc - 4 Puck
83-92 RX-7 Non-Turbo

The 4-Puck 225mm Race Clutch Disc, offered for all 1983-92 RX-7 Non-Turbo chassis, is designed for drag and road race use. The disc incorporates four (4) sintered copper pucks and a solid hub for quick, positive engagement, greater fatigue resistance and improved heat dissipation. The sharpened engagement/disengagement characteristics of this disc require careful driver attention - this disc is not intended for street use.
As with all of our clutch products, it is built only from new parts.

Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

WARNING: None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Race Pressure Plate - 1983-92 12A/13B 6-Port Non-turbo

Race Pressure Plate - 1983-92 12A/13B 6-Port Non-turbo

The Exedy Race Pressure Plate for all 1983-1992 12A and the 13B 6-Port rotary engines (non-turbo) exerts very highre plate. As with all of our products, this disc is built only from new parts - this is not a remanufactured unit. This pressure plate... Race Pressure Plate - 1983-92 12A/13B 6-Port Non-turbo

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Oil Filter Bypass Block Kit - 79-95 Rotary Engine

Oil Filter Bypass Block Kit - 79-95 Rotary Engine

The Racing Beat-designed and manufactured Oil Filter Bypass Block Kit facilitates the installation of any remote oil filter assembly for use on any 1979-95 rotary engine. Machined from aluminum-alloy with an internal passage that eliminates the... Oil Filter Bypass Block Kit - 79-95 Rotary Engine

Holley Intake Kit - 74-85 13B Bridge Port

Holley Intake Kit - 74-85 13B Bridge Port

The Racing Beat-Modified Holley Race Intake System for the 1974-85 13B 4-Port Bridge Port Engine is an inexpensive and reliable way to obtain extraordinary power from your 13B 4-Port Bridge Port Engine. These kits are especially effective in drag... Holley Intake Kit - 74-85 13B Bridge Port

Go to Racing Beat Home Page
Select: Go to Shopping Cart