Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Sport/Race 4-Puck Clutch Disc 71-82 12A & 13B - 215mm OD

Sport/Race 4-Puck Clutch Disc
71-82 12A & 13B - 215mm OD

Part Number: 12528

Price: $175.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Sport/Race 4-Puck Clutch Disc
71-82 12A & 13B - 215mm OD

Sport/Race Stage 2 Clutch Disc 
4-Puck Design - 215mm OD 

1971-82 12A & 13B Rotary Engine Applications
(except Rotary Pick-Up) 

The Racing Beat exclusive Sport Clutch Disc is designed for drag and road race use with all 1971-82 12A & 13B Applications (except Rotary Pick Up). This clutch disc features four (4) sintered-copper pucks and a sprung hub for a very quick and positive engagement. Although the sprung hub will asborb some of the intial engagement of the more aggressive copper pads this disc requires careful driver attention - this disc is not recommended for street use. This disc interchanges exactly with the stock disc and can be used with the stock or aftermarket compatible pressure plate.

Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM we highly recommend the installation of a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Actual disc not shown in photo.

 

Made in the USAMade in the USA under license by Racing Beat, Inc.
Prop65Warning

Customers who bought the above item also often bought:

Exedy Street Pressure Plate  - 79-82 RX-7 12A - 215mm Disc

Exedy Street Pressure Plate - 79-82 RX-7 12A - 215mm Disc

The Exedy Street Pressure Plate, intended for the 1979-82 RX-7 12A & 13B RX-7 chassis, is designed as a Mazda OE replacement for street applications. This RX-7re plate, and can be used with the 215mm OD stock disc or any equivalent replacement... Exedy Street Pressure Plate  - 79-82 RX-7 12A - 215mm Disc

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of clearance,... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Seal Kit - 79-88 RX-7 Non-Turbo

Transmission Seal Kit - 79-88 RX-7 Non-Turbo

1979-88 RX-7 12A & 13B (Non-turbo) Transmission Seal Kit We recommend replacing the RX-7 transmission front seal and rear seals when re-installing the RX-7 transmission to reduce the risk of leakage. Although old age is a primary source of a failing... Transmission Seal Kit - 79-88 RX-7 Non-Turbo

Weber Carburetor - 48 IDA Down Draft

Weber Carburetor - 48 IDA Down Draft

*Weber has been out of stock and have no ETA as of 11/23/20* Both the elegant design and the simplicity in the maintenance of the Weber 48 IDA Carburetor have proven to be compelling reasons as to why the Weber name has remained so popular over the... Weber Carburetor - 48 IDA Down Draft

Go to Racing Beat Home Page
Select: Go to Shopping Cart