Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Sport/Race 4-Puck Clutch Disc 83-92 RX-7 N/T

Sport/Race 4-Puck Clutch Disc
83-92 RX-7 N/T

Part Number: 12529

Price: $163.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Sport/Race 4-Puck Clutch Disc
83-92 RX-7 N/T

The Sport/Race Clutch Disc for the 1983-92 RX-7 chassis (12A & 13B 6-Port Non-Turbo) is designed for road race and occasional drag race use. The disc features four (4) sintered copper pucks and a sprung hub for a quick, positive engagement. The quick engagement/ disengagement requires careful driver attention - this disc is not recommended for street use. This disc interchanges exactly with the stock disc and can be used with the stock pressure plate.

As with all of our clutch products, it is built only from new parts.

WARNING: None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Our Exedy Street/Strip Pressure Plate, intended for the 1983-92 RX-7 12A & 13B (6-Port Non-Turbo) chassis, is designed for high-performance street applications and for occasional drag or road racing. A stronger diaphragm spring applies... Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Race Pressure Plate - 1983-92 12A/13B 6-Port Non-turbo

Race Pressure Plate - 1983-92 12A/13B 6-Port Non-turbo

The Exedy Race Pressure Plate for all 1983-1992 12A and the 13B 6-Port rotary engines (non-turbo) exerts very highre plate. As with all of our products, this disc is built only from new parts - this is not a remanufactured unit. This pressure plate... Race Pressure Plate - 1983-92 12A/13B 6-Port Non-turbo

Transmission Throwout Bearing - 89-92 RX-7 - All

Transmission Throwout Bearing - 89-92 RX-7 - All

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 89-92 RX-7 - All

Go to Racing Beat Home Page
Select: Go to Shopping Cart