Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Street Pressure Plate  79-82 RX-7 12A - 215mm

Street Pressure Plate
79-82 RX-7 12A - 215mm

RB Part Number: 12603

Exedy
MZC508

Price: $85.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Street Pressure Plate
79-82 RX-7 12A - 215mm

The Exedy Street Pressure Plate, intended for the 1979-82 RX-7 12A & 13B RX-7 chassis, is designed as a Mazda OE replacement for street applications. This RX-7 pressure plate interchanges exactly with the stock pressure plate, and can be used with the 215mm stock disc or any equivalent replacement aftermarket disc.

We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Street/Strip HD Clutch Disc - 71-82 12A & 13B - 215mm

Street/Strip HD Clutch Disc - 71-82 12A & 13B - 215mm

The 215mm Street/Strip HD (Heavy Duty) Disc for all 1971-82 12A & 13B Applications (except Rotary Pick-Up) is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching... Street/Strip HD Clutch Disc - 71-82 12A & 13B - 215mm

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of clearance,... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Sport/Race Clutch Disc - 71-82 12A & 13B - 215mm

Sport/Race Clutch Disc - 71-82 12A & 13B - 215mm

The 4-Puck, 215mm Sport/Race Clutch Disc is designed for drag and road race use with all 1971-82 12A & 13B Applications (except Rotary Pick). The disc features four (4) sintered copper pucks and a sprung hub for a quick, positive engagement. The quick... Sport/Race Clutch Disc - 71-82 12A & 13B - 215mm

Clutch Alignment Tool - 71-92 All non-turbo engines

Clutch Alignment Tool - 71-92 All non-turbo engines

This clutch disc alignment tool simplifies clutch installation on all 1971-92 12A and 13B non-turbo rotary engines by aligning the clutch disc splines with the eccentric shaft pilot bearing. Although you'll likely use this tool only once or twice... Clutch Alignment Tool - 71-92 All non-turbo engines

Go to Racing Beat Home Page
Select: Go to Shopping Cart