Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Exedy Street - Stage 1 Pressure Plate 83-92 12A & 13B Non-Turbo - 225mm Disc

Exedy Street - Stage 1 Pressure Plate
83-92 12A & 13B Non-Turbo - 225mm Disc

RB Part Number: 12608

Exedy
ZC504D

Price: $191.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Exedy Street - Stage 1 Pressure Plate
83-92 12A & 13B Non-Turbo - 225mm Disc

The Exedy Street/Strip Pressure Plate, intended for the 1983-92 RX-7 12A & 13B (6-Port Non-Turbo) chassis, is designed for high-performance street applications and for occasional drag or road racing. A stronger diaphragm spring applies substantially more holding force (700 kg - 1544 lbs clamping load) to the clutch disc to avoid clutch slip under load. This RX-7 pressure plate interchanges exactly with the stock pressure plate, and can be used with the 225mm OD stock disc or any equivalent replacement aftermarket disc.

We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Prop65Warning

Customers who bought the above item also often bought:

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of clearance,... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Street - Stage 1 Clutch Disc - 83-92 12A & 13B Non-Turbo - 225mm OD

Street - Stage 1 Clutch Disc - 83-92 12A & 13B Non-Turbo - 225mm OD

Street - Stage 1 Clutch Disc - 225mm OD 1983-92 Non-Turbo RX-7 (12A & 13B 6-Port)  This RX-7 replacement clutch disc utilizes flattened marcel springs to reduce flexing and two rivets per marcel to increase lining strength. The... Street - Stage 1 Clutch Disc - 83-92 12A & 13B Non-Turbo - 225mm OD

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13B Non-Turbo - 225mm OD

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13B Non-Turbo - 225mm OD

Sport/Race Stage 2 Clutch Disc 4-Puck Design - 225mm OD 1983-92 12A & 13B 6-Port The Sport/Race 4-Puck Clutch Disc for the 1983-92 RX-7 chassis (12A & 13B 6-Port) is designed for road race and occasional drag race use. This 225mm OD... Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13B Non-Turbo - 225mm OD

Transmission Seal Kit - 79-88 RX-7 Non-Turbo

Transmission Seal Kit - 79-88 RX-7 Non-Turbo

1979-88 RX-7 12A & 13B (Non-turbo) Transmission Seal Kit We recommend replacing the RX-7 transmission front seal and rear seals when re-installing the RX-7 transmission to reduce the risk of leakage. Although old age is a primary source of a failing... Transmission Seal Kit - 79-88 RX-7 Non-Turbo

Go to Racing Beat Home Page
Select: Go to Shopping Cart