Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Street/Strip Pressure Plate 83-92 12A/13B 6PT

Street/Strip Pressure Plate
83-92 12A/13B 6PT

RB Part Number: 12608

Exedy
ZC504D

Price: $163.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Street/Strip Pressure Plate
83-92 12A/13B 6PT

Our Exedy Street/Strip Pressure Plate, intended for the 1983-92 RX-7 12A & 13B (6-Port Non-Turbo) chassis, is designed for high-performance street applications and for occasional drag or road racing. A stronger diaphragm spring applies substantially more holding force (700 kg - 1544 lbs clamping load) to the clutch disc to avoid clutch slip under load. This RX-7 pressure plate interchanges exactly with the stock pressure plate, and can be used with the 255mm stock disc, our Street/Strip or Street/Strip Heavy Duty Discs, or our Race Discs. As with all of our products, it is built from new parts.

We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Street/Strip HD Clutch Disc - 83-92  Non-Turbo

Street/Strip HD Clutch Disc - 83-92 Non-Turbo

The Street/Strip HD (Heavy Duty) 225mm Clutch Disc for the 1983-92 Non-Turbo RX-7s is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the... Street/Strip HD Clutch Disc - 83-92  Non-Turbo

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

The Sport/Race Clutch Disc for the 1983-92 RX-7 chassis (12A & 13B 6-Port Non-Turbo) is designed for road race and occasional drag race use. The disc features four (4) sintered copper pucks and a sprung hub for a quick, positive engagement. The... Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 N/T

Transmission Seal Kit - 79-88 Non-Turbo

Transmission Seal Kit - 79-88 Non-Turbo

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing... Transmission Seal Kit - 79-88 Non-Turbo

Go to Racing Beat Home Page
Select: Go to Shopping Cart