Street/Strip Pressure Plate
83-92 12A/13B 6PT

RB Part Number: 12608

Exedy
ZC504D

Price: $163.00

Qty:

Addtional Photos - Select to Enlarge

Street/Strip Pressure Plate
83-92 12A/13B 6PT

Our Exedy Street/Strip Pressure Plate, intended for the 1983-92 RX-7 12A & 13B (6-Port Non-Turbo) chassis, is designed for high-performance street applications and for occasional drag or road racing. A stronger diaphragm spring applies substantially more holding force (700 kg - 1544 lbs clamping load) to the clutch disc to avoid clutch slip under load. This RX-7 pressure plate interchanges exactly with the stock pressure plate, and can be used with the 255mm stock disc, our Street/Strip or Street/Strip Heavy Duty Discs, or our Race Discs. As with all of our products, it is built from new parts.

We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.