Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Exedy Race Pressure Plate 1983-92 12A & 13B Non-Turbo - 225mm Disc

Exedy Race Pressure Plate
1983-92 12A & 13B Non-Turbo - 225mm Disc

RB Part Number: 12621

Exedy
ZC505D

Price: $205.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Exedy Race Pressure Plate
1983-92 12A & 13B Non-Turbo - 225mm Disc

The Exedy Race Pressure Plate (ZC505D)  for all 1983-1992 12A & 13B non-turbo rotary engines exerts very high pressure on the disk (820kg - 1807 lbs clamping load)  to avoid slippage and is intended primarily for high horsepower drag and road racing applications. It interchanges exactly with the stock RX-7 pressure plate and is compatible with all 225mm OD RX-7 clutch discs.

We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the flywheel or clutch components we offer should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Prop65Warning

Customers who bought the above item also often bought:

Race 4-Puck Clutch Disc - 83-92 RX-7 Non-Turbo - 225mm OD

Race 4-Puck Clutch Disc - 83-92 RX-7 Non-Turbo - 225mm OD

Race Stage 3 Clutch Disc Solid Hub / 4-Puck Design - 225mm OD 1983-92 RX-7 12A & 13B (non-turbo) Applications The Race 4-Puck 225mm OD Clutch Disc, offered for all 1983-92 RX-7 Non-Turbo chassis, is designed for drag and road race use. The disc... Race 4-Puck Clutch Disc - 83-92 RX-7 Non-Turbo - 225mm OD

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of clearance,... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Race 6-Puck Clutch Disc - 83-92 RX-7 Non-Turbo - 225mm OD

Race 6-Puck Clutch Disc - 83-92 RX-7 Non-Turbo - 225mm OD

The Race 6-Puck Clutch Disc for the 1983-92 RX-7 Non-Turbo (225mm OD) is designed for drag and road race use. The disc incorporates six (6) sintered copper pucks and a solid hub for quick, positive engagement, greater fatigue resistance and improved heat... Race 6-Puck Clutch Disc - 83-92 RX-7 Non-Turbo - 225mm OD

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13B Non-Turbo - 225mm OD

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13B Non-Turbo - 225mm OD

Sport/Race Stage 2 Clutch Disc 4-Puck Design - 225mm OD 1983-92 12A & 13B 6-Port The Sport/Race 4-Puck Clutch Disc for the 1983-92 RX-7 chassis (12A & 13B 6-Port) is designed for road race and occasional drag race use. This 225mm OD... Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13B Non-Turbo - 225mm OD

Go to Racing Beat Home Page
Select: Go to Shopping Cart