Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Exedy Race Pressure Plate 1983-92 12A & 13B Non-Turbo - 225mm

Exedy Race Pressure Plate
1983-92 12A & 13B Non-Turbo - 225mm

RB Part Number: 12621

Exedy
ZC505D

Price: $196.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Exedy Race Pressure Plate
1983-92 12A & 13B Non-Turbo - 225mm

The Exedy Race Pressure Plate for all 1983-1992 12A & 13B non-turbo rotary engines exerts very high pressure on the disk (820kg - 1807 lbs clamping load)  to avoid slippage and is intended only for drag and road racing applications. It interchanges exactly with the stock RX-7 pressure plate. This pressure plate is compatible with all 225mm RX-7 clutch discs.

We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the flywheel or clutch components we offer should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Race Disc - 4 Puck - 83-92 RX-7 Non-Turbo - 225mm

Race Disc - 4 Puck - 83-92 RX-7 Non-Turbo - 225mm

The 4-Puck 225mm Race Clutch Disc, offered for all 1983-92 RX-7 Non-Turbo chassis, is designed for drag and road race use. The disc incorporates four (4) sintered copper pucks and a solid hub for quick, positive engagement, greater fatigue... Race Disc - 4 Puck - 83-92 RX-7 Non-Turbo - 225mm

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13 B Non-Turbo - 225mm

Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13 B Non-Turbo - 225mm

The Sport/Race Clutch Disc for the 1983-92 RX-7 chassis (12A & 13B 6-Port Non-Turbo) is designed for road race and occasional drag race use. The disc features four (4) sintered copper pucks and a sprung hub for a quick, positive engagement. The... Sport/Race 4-Puck Clutch Disc - 83-92 RX-7 12A & 13 B Non-Turbo - 225mm

Transmission Seal Kit - 89-92 Non-Turbo

Transmission Seal Kit - 89-92 Non-Turbo

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing... Transmission Seal Kit - 89-92 Non-Turbo

Go to Racing Beat Home Page
Select: Go to Shopping Cart