Early Rotary & 1979-85 Mazda RX-7 : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Clutch Slave Cylinder RX-7 4/1979-82 12A RX-7 1984-88 13B Non-Turbo

Clutch Slave Cylinder
RX-7 4/1979-82 12A RX-7 1984-88 13B Non-Turbo

RB Part Number: 12653

Exedy
SC611

Price: $11.00

Qty:

Clutch Slave Cylinder - RX-7 4/1979-82 12A RX-7 1984-88 13B Non-Turbo - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Clutch Slave Cylinder
RX-7 4/1979-82 12A RX-7 1984-88 13B Non-Turbo

Clutch Slave Cylinder - 04/1979-82 RX-7 12A & 1984-88 RX-7 13B Non-Turbo

If you're noticing that your clutch will not engage or disengage and/or you're losing clutch fluid from the master reservoir, there's a good chance that it's time to replace the clutch slave cylinder. Locate the slave cylinder near the of the transmission, and if you can feel or see fluid in or around the rubber boot, than the seals within the slave cylinder have simply worn out.

In years past is was common to remove and rebuild clutch cylinders using a gasket and O-ring rebuild kit, but these components are produced today in such mass quantities that the cost to just replace each component is extremely resonable.Why bother with rebuilding? Since Racing Beat is an Exedy dealer and we buy direct, we offer the Exedy clutch replacement components in our line-up. With so many cheap, overseas replacement parts on the market, we strongly suggest you avoid hassles with an unknown brand and stick with a quality part. 

If you're replacing your clutch disc or flywheel and have the transmission removed from your RX-7, now would be an ideal time to replace both the master and slave cylinders. Install both cylinders at the same time and you'll only need to bleed the hydraulic system once! 

Part photos were taken from the Exedy website and may not be the exact parts as shown.

Prop65Warning

Customers who bought the above item also often bought:

Clutch Master Cylinder - RX-7 1986-91 13B Non-Turbo & Turbo

Clutch Master Cylinder - RX-7 1986-91 13B Non-Turbo & Turbo

Exedy Clutch Master Cylinder - 1986-91 13B Non-Turbo & Turbo As your early rotary has gotten older and the miles have increased, it's probably time to consider replacing your clutch master cylinder. With age the internal rubber seals and... Clutch Master Cylinder - RX-7 1986-91 13B Non-Turbo & Turbo

Goodridge Stainless Steel Clutch Line - 86-92 RX-7

Goodridge Stainless Steel Clutch Line - 86-92 RX-7

Goodridge Stainless Steel Clutch Line - 1986-92 Mazda RX-7 (ALL) Replace the old, tired rubber clutch line on your 1986-92 RX-7 with an upgraded braided stainless steel line. This Mazda RX-7 clutch line be used for both street and race applications.... Goodridge Stainless Steel Clutch Line - 86-92 RX-7

Goodridge Stainless Steel Clutch Line - 81-85 RX-7

Goodridge Stainless Steel Clutch Line - 81-85 RX-7

Goodridge Stainless Steel Clutch Line - 1981-85 Mazda RX-7 (ALL) Replace the old, tired rubber clutch line on your 1981-85 RX-7 with an upgraded braided stainless steel line. This Mazda RX-7 clutch line be used for both street and race applications.... Goodridge Stainless Steel Clutch Line - 81-85 RX-7

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of clearance,... Transmission Throwout Bearing - 79-88 - 12A & 13B 6 Port

Go to Racing Beat Home Page
Select: Go to Shopping Cart