Early Rotary & 1979-85 Mazda RX-7 : Exhaust Complete Systems

 : Exhaust - Complete Systems : Street Port Exhaust System 84-85 GSL-SE

Street Port Exhaust System
84-85 GSL-SE *

Part Number: 16424

Price: $1,072.00

Qty:

Street Port Exhaust System - 84-85 GSL-SE - Detail 1Street Port Exhaust System - 84-85 GSL-SE - Detail 2Street Port Exhaust System - 84-85 GSL-SE - Detail 3

Addtional Photos - Select to Enlarge

Facebook Share

Street Port Exhaust System
84-85 GSL-SE *

Our Racing Beat-designed, "Long Primary" Street Port Complete RX-7 Exhaust System is designed for any 1979-85 RX-7 with a 13B street-ported engine. Designed specifically to optimize the performance benefit of a ported rotary engine, this RX-7 exhaust system will provide the maximum power output possible from an aftermarket RX-7 exhaust system. While louder than the stock system, the dual resonated center section offers maximum exhaust gas flow and scavenging while reducing sound output to a modest level.

Offered as a packaged set, this kit consists of a Road Race Header, the Street Port Center Section (for a 13B 6-Port engine), and a high flow Power Pulse Main muffler.

The Long Primary system typically adds 5% or more horsepower over a standard Short Primary system on a street ported engine, especially at higher RPMs. This system can also be used on non-ported engines with good results. It is strictly bolt-on, with no welding required. These complete "bolt-on" systems come complete with all required mounting hardware and gaskets. The center section for this application includes an exhaust backpressure pickup for to allow the correct operation of the 6-Port intake actuators. Since this is intended for racing applications, there is no provision for an oxygen sensor on this system.

.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Oxygen Sensor Fitting - Stainless Steel

Oxygen Sensor Fitting - Stainless Steel

Commonly referred to as a oxygen sensor "bung", this stainless steel fitting can be installed onto any exhaust component that requires an oxygen sensor. This fitting can also be used when installing a wide-band oxygen sensor or an exhaust... Oxygen Sensor Fitting - Stainless Steel

6-Port Sensing Tube Gasket - 84-85 RX-7 GSL-SE

6-Port Sensing Tube Gasket - 84-85 RX-7 GSL-SE

This gasket is used on the back-pressure sensing tube found on 1984-85 RX-7 GSL-SE (6-port) applications. One gasket required. 6-Port Sensing Tube Gasket - 84-85 RX-7 GSL-SE

Go to Racing Beat Home Page
Select: Go to Shopping Cart