Early Rotary & 1979-85 Mazda RX-7 : Cooling System

 : Cooling System : Aluminum Main Pulley 74-92 Rotary Engines (All)

Aluminum Main Pulley
74-92 Rotary Engines (All)

Part Number: 11473

Price: $65.00

Qty:

Aluminum Main Pulley - 74-92 Rotary Engines (All) - Detail 1Aluminum Main Pulley - 74-92 Rotary Engines (All) - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

Aluminum Main Pulley
74-92 Rotary Engines (All)

Racing Beat's Single Sheave Main Pulley for virtually all 1974-92 12A and 13B engines reduces the water pump/alternator drive ratio substantially to avoid water pump cavitation and alternator damage due to the extreme RPMs encountered in racing. This aluminum pulley (6.4 oz) also reduces the engine's rotating inertia and the power loss to the accessories. The pulley is provided with a series of engraved timing marks at 0 degrees (TDC), 12.5 degrees BTC, and 25 degrees BTC.

Precision-machined from billet aluminum alloy, each pulley is finished with a hard anodized surface treatment to ensure superior longevity and excellent abrasion resistance. As compared with standard anodizing processes (typically identified by components finished with a bright red or blue finish), a hard-anodized aluminum component will offer comparatively superior durability and wear characteristics. Hard anodized components are typically identified by a darker surface coating, most commonly with a dark grey or black matte finish appearance. 

We do not recommend this underdrive pulley be installed on "street-driven" cars that are used for stop-and-go driving. In addition, we do not recommend the use of this pulley on 1987-91 Turbo II engines unless modifications have been made (shorter intake runners, etc..) to increase the engine's RPM range substantially. Turbo II engines produce their peak power in a lower RPM range, relative to a non-turbo engine.

This pulley can be used in combination with the Racing Beat Single Sheave Alternator Pulley.

Installation Note: It is not practical to offer a standard replacement belt due to the variations in engine configurations. After measuring the distance required for your application, we suggest you contact your local auto parts store to obtain the required 3/8-inch wide replacement belt.

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Aluminum Alternator Pulley - 71-92 All Rotary Engines (All)

Aluminum Alternator Pulley - 71-92 All Rotary Engines (All)

This Mazda Competition Parts Single Sheave Alternator Pulley reduces alternator RPM approximately 20% from stock for street high-performance and racing use. For use on virtually all 1974-8-92 12A and 13B rotary engines, this... Aluminum Alternator Pulley - 71-92 All Rotary Engines (All)

Racing Beat License Plate Frame

Racing Beat License Plate Frame

This Racing Beat logo license plate frame will look good on any Mazda vehicle! Constructed from heavy gauge plastic, this economical plate frame is the perfect addition to your vehicle.

Racing Beat License Plate Frame

Tubular Dowel Puller Tool

Tubular Dowel Puller Tool

The Tubular Dowel Puller Tool allows easy removal of the four tubular dowels used to align the engine housings. In some instances, these dowels can be removed by hand, but this inexpensive tool facilitates the task.

Tubular Dowel Puller Tool

Race Oil Pump - 74-85 12A & 13B

Race Oil Pump - 74-85 12A & 13B

The Mazda Competition Department Oil Pump, for all 1974-85 12A and 13B engines, interchanges exactly with the stock oil pump in all 1974-85 engines. The race oil pump rotor set width is 17.5mm, as opposed to 15mm in stock 1974-75 engines and 12.5mm... Race Oil Pump - 74-85 12A & 13B

Go to Racing Beat Home Page
Select: Go to Shopping Cart