Early Rotary & 1979-85 Mazda RX-7 : Cooling System

 : Cooling System : Alternator and Main Drive Pulley Set - Double Sheave 74-92 Rotary Engines (All)

Alternator and Main Drive Pulley Set - Double Sheave
74-92 Rotary Engines (All)

Part Number: pulleyset2

Price: $142.00

Qty:

Alternator and Main Drive Pulley Set - Double Sheave - 74-92 Rotary Engines (All) - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Alternator and Main Drive Pulley Set - Double Sheave
74-92 Rotary Engines (All)

Racing Beat RX-7 Pulley Set - Double Sheave
Packaged as a pulley set, each kit includes one (1) double sheave alternator and one (1) double sheave main drive pulley.

Double Sheave Aluminum Alternator Pulley (Part no. 11479)
The Racing Beat-designed Double Sheave Aluminum Alternator Pulley reduces alternator RPM approximately 20% from stock RPM, and is intended for high performance and moderate race use. It is compatible with either the stock main pulley, or assuming you are not using the air pump, our Double Sheave Aluminum Main Drive Pulley. For use on virtually all 1974-92 12A and 13B rotary engines. The weight of this pulley is 7.2 oz.

Double Sheave Aluminum Main Drive (Part no. 11469)
The Racing Beat Double Sheave Aluminum Main Drive Pulley for virtually all 1974-92 12A and 13B engines is designed for high performance/RPM street and moderate racing use, slowing the water pump and alternator 13-15 %, thereby reducing cavitation and power loss. If used with our Aluminum Alternator Double Sheave Pulley, you can have a true dual belt system. The stock air conditioning pulley is accommodated. Timing marks are provided at 10 degrees ATC,  0 degrees (TDC), 10 degrees BTC, and 20 degrees BTC. The weight of this pulley is 16 oz.

We do not recommend this main drive underdrive pulley be installed on "street" driven cars that are used for stop-and-go driving. In addition, we do not recommend the use of this underdrive pulley on 1987-91 RX-7 Turbo II engines unless modifications have been made (shorter intake runners, etc..) to increase the engine's RPM range substantially. Turbo II engines produce their peak power in a lower RPM range, relative to a non-turbo engine.

Manfacturing Excellence
Precision-machined from billet aluminum alloy, each pulley is finished with a hard anodized surface treatment to ensure superior longevity and excellent abrasion resistance. As compared with standard anodizing processes (typically identified by components finished with a bright red or blue finish), a hard-anodized aluminum component will offer comparatively superior durability and wear characteristics. Hard anodized components are typically identified by a darker surface coating, most commonly with a dark grey or black matte finish appearance.

Installation Note
 It is not practical to offer a standard replacement belt due to the variations in engine configurations. After measuring the distance required for your application, we suggest you contact your local auto parts store to obtain the required 3/8-inch wide replacement belt.

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Weber Carb - 51 IDA - Down Draft

Weber Carb - 51 IDA - Down Draft

Both the elegant design and the simplicity in the maintenance of the WEBER Carburetors have proven to be compelling reasons as to why the Weber name has remained so popular over the years.

The Weber 51 IDA carburetor is a special... Weber Carb - 51 IDA - Down Draft

Royal Purple Synthetic Oil - RACE XPR 20W50

Royal Purple Synthetic Oil - RACE XPR 20W50

XPR 20W/50 (formerly labeled Racing 51) is formulated for running extended periods under extreme pressure and heat. Used in oval track, marine, and drag racing. Very popular in sprint cars, late model, truck pullers and bracket racing. Viscosity is... Royal Purple Synthetic Oil - RACE XPR 20W50

13B Oil Pan - 79-85 RX-7 12A Conversion

13B Oil Pan - 79-85 RX-7 12A Conversion

Racing Beat offers the RX-7 GSL-SE 13B Oil Pan to simplify the installation of a 1974-85 13B rotary into a 1979-85 RX-7 chassis delivered with the 12A engine. We also offer Racing Beat's extremely popular laser-cut, MIG-welded Full Stainless... 13B Oil Pan - 79-85 RX-7 12A Conversion

Race Apex Seal Spring - 86-92 Non-Turbo

Race Apex Seal Spring - 86-92 Non-Turbo

Our Racing Beat Race Apex Seal Springs, specifically designed to fit the underside of our 1986-92 Non-Turbo (2mm) Race Apex Seals, provide proper pre-loading for these lighter one-piece seals. Unlike the stock inner and outer dual apex seal spring... Race Apex Seal Spring - 86-92 Non-Turbo

Go to Racing Beat Home Page
Select: Go to Shopping Cart