Early Rotary & 1979-85 Mazda RX-7 : Engine Internal Parts

 : Engine - Internal Parts : Type I Modified Stationary Gear 13B Front

Type I Modified Stationary Gear
13B Front

Part Number: 10013

Price: $169.00

Qty:

Type I Modified Stationary Gear - 13B Front - Detail 1Type I Modified Stationary Gear - 13B Front - Detail 2Type I Modified Stationary Gear - 13B Front - Detail 3

Addtional Photos - Select to Enlarge

Facebook Share

Type I Modified Stationary Gear
13B Front

Our Racing Beat Type I Modified 13B Front Stationary Gears are strongly recommended for engines which are regularly running near or above 8,500 RPM. These gears have had several machining modifications performed, as well as heat-treating of the teeth to improve fatigue resistance and yield strength. The front gear and the standard-ungrooved rear gear have the stock bearing installed. The "special grooved" rear gear includes a three-window bearing and is intended for high power output racing engines, while the standard-ungrooved rear gear is best suited for high output streetable engines.

 

THIS PART CANNOT BE RETURNED FOR EXCHANGE OR REFUND DUE TO ITS FRAGILE NATURE AND POSSIBLE CUSTOMER MISHANDLING 

A Product Of Racing Beat Fabrication ServicesA Product Of Racing Beat Fabrication Services.

Customers who bought the above item also often bought:

Type I Modified Stationary Gear - 13B Rear-Groove

Type I Modified Stationary Gear - 13B Rear-Groove

Our Racing Beat Type I Modified 13B Rear (Special-Grooved) Stationary Gears are strongly recommended for engines which are regularly running near or above 8,500 RPM. These gears have had several machining modifications performed, as well as heat-treating... Type I Modified Stationary Gear - 13B Rear-Groove

Oil Pressure Regulator - Street 80-85 PSI

Oil Pressure Regulator - Street 80-85 PSI

The Racing Beat high performance Rear Oil Pressure Regulator is designed for use on all 1971-1992 12A, 13B, and 20B engines and interchanges exactly with the stock unit. As supplied by Mazda, the factory pressure regulator is intended to bypass at maximum... Oil Pressure Regulator - Street 80-85 PSI

Transmission Seal Kit - 74-78 Trans (All)

Transmission Seal Kit - 74-78 Trans (All)

We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing the... Transmission Seal Kit - 74-78 Trans (All)

Oil Hose Adapter Fitting - 18MM to -10 Hose

Oil Hose Adapter Fitting - 18MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 18mm female metric threads in the rear housing to accept -10 hose ends. Additionally, these 18mm female fittings also fit the 1986-1992... Oil Hose Adapter Fitting - 18MM to -10 Hose

Go to Racing Beat Home Page
Select: Go to Shopping Cart