Engine-to-Header Flange

Engine-to-Header Flange :: 71-73 12A

This laser-cut engine-to-header flange can be used to fabricate a custom exhaust system for any 1971-73 12A engine. This is the same flange that is used on Racing Beat's 12A engine headers. If needed, we offer a replacement gaskets for use with this ...

Part Number: 16181Our Price $30.00 Add to Cart

Engine-to-Header Flange

Engine-to-Header Flange :: 74-85 12A

This 1/2" thick laser-cut engine-to-header exhuast flange can be used to fabricate a custom exhaust system for any 1974-85 12A rotary engine. This is the same flange that is used on Racing Beat's 12A engine- headers. Replacement gasket for use ...

Part Number: 16182Our Price $30.00 Add to Cart

Engine-to-Header Flange - Steel

Engine-to-Header Flange - Steel :: 13B

This 1/2" thick laser-cut engine-to-header exhaust flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This is the same exhaust flange that is used on Racing Beat's 13B engine rotary headers. If needed, we offer a ...

Part Number: 16183Our Price $35.00 Add to Cart

Engine-to-Header Flange - Stainless

Engine-to-Header Flange - Stainless :: 13B Engines

Engine-to-Header Flange (304-Stainless Steel) - This 13B rotary engine-to-header flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This beautifully detailed cast-stainless steel flange is .50" thick and offers an ...

Part Number: 16187Our Price $57.00 Add to Cart

Engine-to-Header Flange

Engine-to-Header Flange :: 3-rotor - 20B Engine

This laser-cut mild steel engine-to-header exhaust flange can be used to fabricate a custom exhaust system for a 20B 3-rotor engine. If needed, we offer a replacement gasket for use with this flange. (Two required - use cut the second gasket to fit.)

Part Number: 16184Our Price $67.00 Add to Cart

Road Race Header

Road Race Header :: Outlet Flange - Steel

This laser-cut flange can be used to fabricate a custom exhaust for use with the Racing Beat Road/Race Header. This two-hole flange measures 6" X 2-13/16" and features two 2" openings. This is the same flange that comes included on Racing ...

Part Number: 16197Our Price $26.00 Add to Cart

Road Race Header

Road Race Header :: Outlet Flange - Stainless Steel

This cast stainless steel flange can be used to fabricate a custom exhaust for use with the Racing Beat Road Race Header. This two-hole flange measures 6" X 2-13/16" and features two openings for use with 2" OD tubing. If needed, we offer a...

Part Number: 16198Our Price $32.00 Add to Cart

Heat Exchanger Outlet Flange - Front

Heat Exchanger Outlet Flange - Front :: 76-80

This laser-cut flange is the same component that is used on the front of our Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange will bolt up to the stock heat exchanger on 1976-80 applications. If needed, we offer a replacement gasket...

Part Number: 16199Our Price $17.00 Add to Cart

Mini Presilencer Flange - Front

Mini Presilencer Flange - Front :: 79-80 RX-7

This laser-cut flange is the same component that is used on the front of our Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange can be used to fabricate a custom exhaust for use with the 1979-80 Streetable Header/Collector with Heat ...

Part Number: 16199.1Our Price $17.00 Add to Cart

Mini Presilencer Flange

Mini Presilencer Flange :: 79-80 Rear

This laser-cut flange is the same flange that is used on the rear of Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange can be used to fabricate a custom exhaust system rearward from the output of the "Mini" presilencer. If ...

Part Number: 16195Our Price $19.00 Add to Cart

Presilencer Flange

Presilencer Flange :: 81-83 RX-7

This laser-cut flange is the same flange that is used on the front and rear of our Racing Beat Presilencer for 1981-83 RX-7 applications (12 mm studs). This flange can be used to fabricate a custom exhaust system rearward from the output of the Racing ...

Part Number: 16195.1Our Price $19.00 Add to Cart

Presilencer Flange

Presilencer Flange :: 84-85 RX-7

This exhaust flange is the same flange that is used on the front and rear of our Racing Beat Presilencer for 1984-85 RX-7 applications (10 mm studs). This flange can be used to fabricate a custom exhaust system rearward from the output of the Racing Beat ...

Part Number: 16190Our Price $17.00 Add to Cart

Back Pressure Pickup Tube Flange

Back Pressure Pickup Tube Flange

This Back Pressure Pickup Tube (also referred to as a 6-Port Intake Sensing Tube) Flange can be used in the fabrication of a sensing tube for use with a 13B 6-Port engine application. If needed, we offer a replacement gasket for use with this flange.

Part Number: 16324Our Price $13.00 Add to Cart

Muffler Flange

Muffler Flange :: 71-80

This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1971-80 applications. Designed to mate with the 1979-80 RX-7 factory connecting pipe, this flange is designed with a recessed area to accommodate the ...

Part Number: 16193Our Price $27.00 Add to Cart

Muffler Flange

Muffler Flange :: 81-82 RX-7

This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1981-82 RX-7applications. If needed, we offer a replacement gasket for use with this flange.

Part Number: 16188Our Price $18.00 Add to Cart

Muffler Flange

Muffler Flange :: 83-85 RX-7

This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1983-85 RX-7 applications. If needed, we offer a replacement gasket for use with this flange.

Part Number: 16195.2Our Price $19.00 Add to Cart

Multi-Purpose Exhaust Flange

Multi-Purpose Exhaust Flange :: Steel 2-inch ID

Simplify the fabrication of your exhaust system and use only one style of exhaust flange! This multi-use exhaust flange is produced from A-36 mild steel and can be used in the design and fabrication of any street or racing exhaust. This laser-cut flange ...

Part Number: 16195.3Our Price $19.00 Add to Cart

Exhaust Flange - Stainless Steel

Exhaust Flange - Stainless Steel :: 2.5-inch ID

We offer this cast-stainless steel 2.5" ID flange for use in many custom applications. This flange measures 12mm" thick (.5"), has 13.5mm" diameter mounting holes spaced 100mm (approx 3.93") apart (from center-to-center). Uses 2.5...

Part Number: 16173Our Price $26.00 Add to Cart

Exhaust Flange - Stainless Steel

Exhaust Flange - Stainless Steel :: 3-inch ID

We offer this cast-stainless steel 3" ID flange for use in many custom applications. This flange measures 7/16" thick, has 7/16" diameter mounting holes spaced 110mm (approx 4-5/16") apart (from center-to-center). Uses 3" ID ...

Part Number: 16185Our Price $27.00 Add to Cart


Road Race Header 79-85
RX-7 12A

Racing Beat's Road Race Header is the first step in building a serious racing exhaust system. The engine-to-pipe flange ...

Add to Cart more info

Our Price: $274.00

Holley Intake Kit
76-85 12A Stock Port

We offer the extremely popular Racing Beat-modified High Performance Holley Intake System Kit for 1976-1985 12A Stock (...

Add to Cart more info

Our Price: $1,101.00

Power Pulse Air Filter Assembly
1971-85 Stock

Racing Beat's dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed ...

Add to Cart more info

Our Price: $67.00

Go to Racing Beat Home Page
Select: Go to Shopping Cart