Early Rotary & 1979-85 Mazda RX-7

Early Rotary & 1979-85 Mazda RX-7 : Exhaust Flanges

Racing Beat offers a wide selection of exhaust flanges for use in the construction or repair of a custom exhaust system. These flanges are the exact same flanges used by Racing Beat in the construction of our exhaust components and are compatible for use when mating with other Racing Beat or stock components as specified. Review our Flange and Gasket Reference Guide to assist with the correct selection of flanges for your project.

Engine-to-Header Flange

Engine-to-Header Flange :: 71-73 12A

This laser-cut engine-to-header flange can be used to fabricate a custom exhaust system for any 1971-73 12A engine. This is the same flange that is used on Racing Beat's 12A engine headers. If needed, we offer a replacement gaskets for use with this ...

Part Number: 16181Our Price $30.00 Add to Cart

Engine-to-Header Flange

Engine-to-Header Flange :: 74-85 12A

This 1/2" thick laser-cut engine-to-header exhuast flange can be used to fabricate a custom exhaust system for any 1974-85 12A rotary engine. This is the same flange that is used on Racing Beat's 12A engine- headers. Replacement gasket for use ...

Part Number: 16182Our Price $30.00 Add to Cart

Engine-to-Header Flange - Steel

Engine-to-Header Flange - Steel :: 13B

This 1/2" thick laser-cut engine-to-header exhaust flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This is the same exhaust flange that is used on Racing Beat's 13B engine rotary headers. If needed, we offer a ...

Part Number: 16183Our Price $35.00 Add to Cart

Engine-to-Header Flange - Stainless

Engine-to-Header Flange - Stainless :: 13B Engines

Engine-to-Header Flange (304-Stainless Steel) - This 13B rotary engine-to-header flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This beautifully detailed cast-stainless steel flange is .50" thick and offers an ...

Part Number: 16187Our Price $57.00 Add to Cart

Engine-to-Header Flange

Engine-to-Header Flange :: 3-rotor - 20B Engine

This laser-cut mild steel engine-to-header exhaust flange can be used to fabricate a custom exhaust system for a 20B 3-rotor engine. If needed, we offer a replacement gasket for use with this flange. (Two required - use cut the second gasket to fit.)

Part Number: 16184Our Price $67.00 Add to Cart

Road Race Header

Road Race Header :: Outlet Flange - Steel

This laser-cut flange can be used to fabricate a custom exhaust for use with the Racing Beat Road/Race Header. This two-hole flange measures 6" X 2-13/16" and features two 2" openings. This is the same flange that comes included on Racing ...

Part Number: 16197Our Price $26.00 Add to Cart

Road Race Header

Road Race Header :: Outlet Flange - Stainless Steel

This cast stainless steel flange can be used to fabricate a custom exhaust for use with the Racing Beat Road Race Header. This two-hole flange measures 6" X 2-13/16" and features two openings for use with 2" OD tubing. If needed, we offer a...

Part Number: 16198Our Price $32.00 Add to Cart

Heat Exchanger Outlet Flange - Front

Heat Exchanger Outlet Flange - Front :: 76-80

This laser-cut flange is the same component that is used on the front of our Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange will bolt up to the stock heat exchanger on 1976-80 applications. If needed, we offer a replacement gasket...

Part Number: 16199Our Price $17.00 Add to Cart

Mini Presilencer Flange - Front

Mini Presilencer Flange - Front :: 79-80 RX-7

This laser-cut flange is the same component that is used on the front of our Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange can be used to fabricate a custom exhaust for use with the 1979-80 Streetable Header/Collector with Heat ...

Part Number: 16199.1Our Price $17.00 Add to Cart

Mini Presilencer Flange

Mini Presilencer Flange :: 79-80 Rear

This laser-cut flange is the same flange that is used on the rear of Racing Beat Mini Presilencer for 1979-80 RX-7 applications. This flange can be used to fabricate a custom exhaust system rearward from the output of the "Mini" presilencer. If ...

Part Number: 16195Our Price $19.00 Add to Cart

Presilencer Flange

Presilencer Flange :: 81-83 RX-7

This laser-cut flange is the same flange that is used on the front and rear of our Racing Beat Presilencer for 1981-83 RX-7 applications (12 mm studs). This flange can be used to fabricate a custom exhaust system rearward from the output of the Racing ...

Part Number: 16195.1Our Price $19.00 Add to Cart

Presilencer Flange

Presilencer Flange :: 84-85 RX-7

This exhaust flange is the same flange that is used on the front and rear of our Racing Beat Presilencer for 1984-85 RX-7 applications (10 mm studs). This flange can be used to fabricate a custom exhaust system rearward from the output of the Racing Beat ...

Part Number: 16190Our Price $17.00 Add to Cart

Back Pressure Pickup Tube Flange

Back Pressure Pickup Tube Flange

This Back Pressure Pickup Tube (also referred to as a 6-Port Intake Sensing Tube) Flange can be used in the fabrication of a sensing tube for use with a 13B 6-Port engine application. If needed, we offer a replacement gasket for use with this flange.

Part Number: 16324Our Price $13.00 Add to Cart

Muffler Flange

Muffler Flange :: 71-80

This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1971-80 applications. Designed to mate with the 1979-80 RX-7 factory connecting pipe, this flange is designed with a recessed area to accommodate the ...

Part Number: 16193Our Price $27.00 Add to Cart

Muffler Flange

Muffler Flange :: 81-82 RX-7

This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1981-82 RX-7applications. If needed, we offer a replacement gasket for use with this flange.

Part Number: 16188Our Price $18.00 Add to Cart

Muffler Flange

Muffler Flange :: 83-85 RX-7

This laser-cut muffler flange can be used in the fabrication of a custom exhaust system for use on 1983-85 RX-7 applications. If needed, we offer a replacement gasket for use with this flange.

Part Number: 16195.2Our Price $19.00 Add to Cart

Multi-Purpose Exhaust Flange

Multi-Purpose Exhaust Flange :: Steel 2-inch ID

Simplify the fabrication of your exhaust system and use only one style of exhaust flange! This multi-use exhaust flange is produced from A-36 mild steel and can be used in the design and fabrication of any street or racing exhaust. This laser-cut flange ...

Part Number: 16195.3Our Price $19.00 Add to Cart

Exhaust Flange - Stainless Steel

Exhaust Flange - Stainless Steel :: 2.5-inch ID

We offer this cast-stainless steel 2.5" ID flange for use in many custom applications. This flange measures 12mm" thick (.5"), has 13.5mm" diameter mounting holes spaced 100mm (approx 3.93") apart (from center-to-center). Uses 2.5...

Part Number: 16173Our Price $26.00 Add to Cart

Exhaust Flange - Stainless Steel

Exhaust Flange - Stainless Steel :: 3-inch ID

We offer this cast-stainless steel 3" ID flange for use in many custom applications. This flange measures 7/16" thick, has 7/16" diameter mounting holes spaced 110mm (approx 4-5/16") apart (from center-to-center). Uses 3" ID ...

Part Number: 16185Our Price $27.00 Add to Cart


Rotor Muffler
REV25

Racing Beat's REV 25 Rotor Muffler - Here's a Racing Beat exclusive, a Mazda Furai-inspired rotor-shaped ...

Add to Cart more info

Our Price: $180.00

Power Pulse PR-Extreme RX-7 Muffler - Universal
79-85 RX-7

In response to numerous requests from customers demanding a very low restriction“street capable” muffler, ...

Add to Cart more info

Our Price: $320.00

Oil Presssure /Temperature Sensor Adapter

The Racing Beat-designed TYPE II Oil Pressure and Temperature Sensor Adapter unit is compatible with select 1971-92 12A ...

Add to Cart more info

Our Price: $74.00

Go to Racing Beat Home Page
Select: Go to Shopping Cart