Early Rotary & 1979-85 Mazda RX-7 : Exhaust Flanges

 : Exhaust - Flanges : Exhaust Flange - Stainless Steel 2.5-inch ID

Exhaust Flange - Stainless Steel
2.5-inch ID

Part Number: 16173

Price: $38.37

Qty:

Exhaust Flange - Stainless Steel - 2.5-inch ID - Detail 1Exhaust Flange - Stainless Steel - 2.5-inch ID - Detail 2

Addtional Photos - Select to Enlarge

Exhaust Flange - Stainless Steel
2.5-inch ID

Stainless Steel Exhaust Flange - 2.5" ID

We offer this cast-stainless steel 2.5" ID flange for use in many custom applications. This flange measures 12mm thick (.5"), has 13.5mm" diameter mounting holes spaced 100mm (approx 3.93") apart (from center-to-center). Uses 2.5" ID gasket.

This flange is not currently used on any Racing Beat exhaust system component. 

 

Prop65Warning

Customers who bought the above item also often bought:

Down Pipe & Presilencer Gasket - 86-92 RX-7

Down Pipe & Presilencer Gasket - 86-92 RX-7

This gasket can be used with the following Racing Beat exhaust components: Non-turbo Down-Pipe 1986-92 RX-7 (Front & Rear) - This gasket can be used at the front (1 each required) and rear (1 each required) positions of the Racing Beat Down... »more
Price: $13.94 ADD »

Exhaust System Gasket - Multi-Use 90-97 Miata

Exhaust System Gasket - Multi-Use 90-97 Miata

This replacement gasket can be used on the Miata exhaust system as follows: 1990-93 Miata: 1) Catalytic converter to connecting pipe. This gasket can be used on the outlet of the catalytic converter between the either the Mazda OE exhaust system, or... »more
Price: $13.94 ADD »

Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

Engine-to-Header Gasket - 1984-92 13B 6-Port Engine - This gasket is required to mount when mounting a header or exhaust manifold to a 1984-92 13B (6-Port Intake) rotary engine, or a 20B 3-rotor engine (2 needed - cutting required). »more
Price: $30.73 ADD »

Exhaust Flange - Stainless Steel - 3-inch ID

Exhaust Flange - Stainless Steel - 3-inch ID

We offer this cast-stainless steel 3" ID flange for use in many custom applications. This flange measures 7/16" thick, has 7/16" diameter mounting holes spaced 110mm (approx 4-5/16") apart (from center-to-center). Uses 3" ID... »more
Price: $39.69 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart