Early Rotary & 1979-85 Mazda RX-7 : Exhaust Flanges

 : Exhaust - Flanges : Engine-to-Header Flange 74-85 12A

Engine-to-Header Flange
74-85 12A

Part Number: 16182

Price: $47.30

On backorder. Priority Pre-Order this part to ship as soon as available.
Estimated availability: 03/01/24.

Qty:

Engine-to-Header Flange - 74-85 12A - Detail 1

Addtional Photos - Select to Enlarge

Engine-to-Header Flange
74-85 12A

Flange & Gasket Guide

Flange & Gasket Guide

Use this illustrated guide to select the exact flange and/or gasket for your application.

This 1/2" thick laser-cut engine-to-header exhuast flange can be used to fabricate a custom exhaust system for any 1974-85 12A rotary engine. This is the same flange that is used on Racing Beat's 12A engine- headers. Replacement gasket for use with this flange: 1974-75 12A (two required) or 1976-85 12A (one required).

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Engine-to-Header Gasket - 76-85 12A Engine

Engine-to-Header Gasket - 76-85 12A Engine

Engine-to-Header Gasket - 1976-85 12A Engine - This gasket is required when mounting an exhaust header or exhaust manifold to a 1976-85 (12A) rotary engine. »more
Price: $47.13 ADD »

U-Bend Pipe 2-inch OD - 4-inch Radius

U-Bend Pipe 2-inch OD - 4-inch Radius

U-Bend Pipe 2" OD (4" Radius) - We offer U-bend tubes with either a 3-inch or 4-inch centerline bend radius for use in fabricating a custom exhaust system. The tubing used for this component is 2-inch O.D., mandrel bend mild steel... »more
Price: $37.60 ADD »

Road Race Header - Outlet Flange - Steel

Road Race Header - Outlet Flange - Steel

This laser-cut flange can be used to fabricate a custom exhaust for use with the Racing Beat Road/Race Header. This two-hole flange measures 6" X 2-13/16" and features two 2" openings. This is the same flange that comes included on... »more
Price: $38.37 ADD »

Intake Gasket - Engine-to-Manifold - 74-5/ 81-85 12A

Intake Gasket - Engine-to-Manifold - 74-5/ 81-85 12A

The 1974-75 and 1981-85 12A Engine-to-Manifold Mazda Factory gasket is intended to fit securely between the intake manifold and the engine. (Photo shown is of actual gasket) If you are installing a Racing Beat Holley or Dellorto intake manifold,... »more
Price: $9.39 ADD »

Go to Racing Beat Home Page
Select: Go to Shopping Cart