Early Rotary & 1979-85 Mazda RX-7 : Exhaust Flanges

 : Exhaust - Flanges : Multi-Purpose Exhaust Flange Steel 2-inch ID

Multi-Purpose Exhaust Flange
Steel 2-inch ID

Part Number: 16195.3

Price: $22.00

Qty:

Multi-Purpose Exhaust Flange - Steel 2-inch ID - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Multi-Purpose Exhaust Flange
Steel 2-inch ID

Flange & Gasket Guide

Flange & Gasket Guide

Use this illustrated guide to select the exact flange and/or gasket for your application.

Simplify the fabrication of your exhaust system and use only one style of exhaust flange! This multi-use exhaust flange is laser cut from A-36 mild steel and can be used in the design and fabrication of any street or racing exhaust. If needed, we offer a replacement gasket for use with this flange.

Specifications:
52.8mm ID
13mm ID Bolt Holes (82mm center-to-center)

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Muffler Gasket - Single Inlet Tube - 83-85 RX-7

Muffler Gasket - Single Inlet Tube - 83-85 RX-7

flange-gasket-guide.pdf This exhaust gasket can be used on the muffler for the 1983-85 RX-7. Muffler Gasket - Single Inlet Tube - 83-85 RX-7

Exhaust System Tubing - 2-inch OD Steel

Exhaust System Tubing - 2-inch OD Steel

Exhaust System Tubing - 2" OD - We offer tubing in 4-foot lengths for custom exhaust applications. The tubing is 2" OD, .120" wall thickness, hot-rolled electric welded (HREW), flash controlled, mild steel. Priced per 4-foot piece. Exhaust System Tubing - 2-inch OD Steel

U-Bend Pipe 2-inch OD - 3-inch Radius

U-Bend Pipe 2-inch OD - 3-inch Radius

U-Bend Pipe 2" OD (3" C/L Radius) - We offer U-bend tubes with either a 3-inch or 4-inch centerline bend radius for use in fabricating a custom exhaust system. The tubing used for this component is 2-inch O.D., mandrel bend mild steel... U-Bend Pipe 2-inch OD - 3-inch Radius

Road Race Header Outlet Gasket

Road Race Header Outlet Gasket

flange-gasket-guide.pdf Racing Beat's Road Race Header - Outlet Gasket This gasket is intended for use with the outlet flange of the Racing Beat Road Race header (one required). This gasket is also used on ALL Racing Beat Road Race... Road Race Header Outlet Gasket

Go to Racing Beat Home Page
Select: Go to Shopping Cart