Early Rotary & 1979-85 Mazda RX-7 : Exhaust Flanges

 : Exhaust - Flanges : Road Race Header Outlet Flange - Stainless Steel

Road Race Header
Outlet Flange - Stainless Steel

Part Number: 16198

Price: $33.00

Qty:

Road Race Header - Outlet Flange - Stainless Steel - Detail 1Road Race Header - Outlet Flange - Stainless Steel - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

Road Race Header
Outlet Flange - Stainless Steel

Flange & Gasket Guide

Flange & Gasket Guide

Use this illustrated guide to select the exact flange and/or gasket for your application.

This cast stainless steel flange can be used to fabricate a custom exhaust for use with the Racing Beat Road Race Header. This two-hole flange measures 6" X 2-13/16" and features two openings for use with 2" OD tubing. If needed, we offer a replacement gasket for use with this flange.

Prop65Warning

Customers who bought the above item also often bought:

Road Race Header Outlet Gasket

Road Race Header Outlet Gasket

flange-gasket-guide.pdf Racing Beat's Road Race Header - Outlet Gasket This gasket is intended for use with the outlet flange of the Racing Beat Road Race header (one required). This gasket is also used on ALL Racing Beat Road Race... Road Race Header Outlet Gasket

Road Race Presilencer - Stainless Steel - 86-92 RX-7

Road Race Presilencer - Stainless Steel - 86-92 RX-7

Racing Beat's Road Race Stainless Steel Presilencer for the 1986-92 RX-7 is intended to bolt-up to the dual outlet of the Road Race RX-7 Header. This fully stainless steel presilencer has been especially designed to function with the Road Race header... Road Race Presilencer - Stainless Steel - 86-92 RX-7

Exhaust System Tubing - 2-inch OD Steel

Exhaust System Tubing - 2-inch OD Steel

Exhaust System Tubing - 2" OD - We offer tubing in 4-foot lengths for custom exhaust applications. The tubing is 2" OD, .120" wall thickness, hot-rolled electric welded (HREW), flash controlled, mild steel. Priced per 4-foot piece. Exhaust System Tubing - 2-inch OD Steel

Unflanged Collector Assembly

Unflanged Collector Assembly

Our Unflanged Collector Assembly allows additional flexibility in the assembly of either a long or short primary exhaust system. All three tubes are 2" O.D. mild steel tubing with a .125" wall thickness. Overall length is 14". This... Unflanged Collector Assembly

Go to Racing Beat Home Page
Select: Go to Shopping Cart