Early Rotary & 1979-85 Mazda RX-7 : Exhaust Headers

 : Exhaust - Headers : Streetable Header/Collector 74-78 13B engines

Streetable Header/Collector
74-78 13B engines *

Part Number: 16007

Price: $288.00

Qty:

Streetable Header/Collector - 74-78 13B engines - Detail 1Streetable Header/Collector - 74-78 13B engines - Detail 2

Addtional Photos - Select to Enlarge

Facebook Share

Streetable Header/Collector
74-78 13B engines *

The Streetable Header/Collector (less outlet flange) is ideal for RX-2, RX-3, RX-4, and COSMO (does not fit rotary pickup ) custom exhaust installations. The flame-cut, .4375-inch thick engine flange provides positive sealing and alignment. By integrating the collector with the header we reduce the effort and cost in completing the exhaust system. Engine-to-pipe gaskets are not included but are available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system. (See "Intake" section)

If the stock resonator is eliminated during installation of this unit, we strongly recommend selecting a Power Pulse Presilencer and installing it in place of the resonator to maintain a pleasant noise level and character.

.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Weber Carb - 48 IDA - Down Draft

Weber Carb - 48 IDA - Down Draft

Both the elegant design and the simplicity in the maintenance of the WEBER 48 IDA Carburetor have proven to be compelling reasons as to why the Weber name has remained so popular over the years.

This Weber 48 IDA unit is primarily suited... Weber Carb - 48 IDA - Down Draft

Engine-to-Header Gasket - 76-78 13B Engine

Engine-to-Header Gasket - 76-78 13B Engine

flange-gasket-guide.pdf

Engine-to-Header Gasket - 1976-78 13B Engine - This gasket is required when mounting a header or exhaust manifold to a 1976-78 13B rotary engine.

Engine-to-Header Gasket - 76-78 13B Engine

ULTRA Ignition Wires - 71-85 12A & 13B

ULTRA Ignition Wires - 71-85 12A & 13B

Racing Beat's ULTRA 8mm wire sets for street-application 1971-1985 12A and 13B engines are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior... ULTRA Ignition Wires - 71-85 12A & 13B

Engine-to-Header Gasket - 74-75 All

Engine-to-Header Gasket - 74-75 All

Engine-to-Header Gasket - 1974-75 All - Two of these gaskets are required to mount a header or exhaust manifold to a 1974-75 (All) rotary engine.

Engine-to-Header Gasket - 74-75 All

Go to Racing Beat Home Page
Select: Go to Shopping Cart