Early Rotary & 1979-85 Mazda RX-7 : Exhaust Universal Parts

 : Exhaust - Universal Parts : Megaphone Exhaust Outlet

Megaphone Exhaust Outlet
*

Part Number: 16118

Price: $62.00

Qty:

Megaphone Exhaust Outlet -  - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Megaphone Exhaust Outlet
*

We also offer separately the megaphone unit used in our Megaphone/Collector Assembly. The inlet diameter is 2" OD, while the flared outlet diameter is approximately 4 inches. The overall length is approximately 24 inches. This is a mild steel component and is provided unfinished.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.
Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Oil Pressure Regulator - Race 105-115 PSI

Oil Pressure Regulator - Race 105-115 PSI

The Racing Beat High Performance Rear Oil Pressure Regulator interchanges exactly with the stock rear oil pressure regulator on all 1971-2008 12A, 13B, and 20B engines. This oil pressure regulator is designed to bypass at 105-115 PSI. (Pressure this... Oil Pressure Regulator - Race 105-115 PSI

Road Race Header - Outlet Flange - Steel

Road Race Header - Outlet Flange - Steel

Flange & Gasket Guide

Flange & Gasket Guide

Use this illustrated guide to select the exact flange and/or gasket for your application.

This laser-cut flange can be used to fabricate a custom exhaust for use with the Racing Beat Road/Race Header. This two-hole flange measures 6" X 2-13/16" and features two 2"... Road Race Header - Outlet Flange - Steel

Intake Gasket - Engine-to-Manf - 74-5/ 81-5 12A

Intake Gasket - Engine-to-Manf - 74-5/ 81-5 12A

The 1974-75 and 1981-85 12A Engine-to-Manifold Mazda Factory gasket is intended to fit securely between the intake manifold and the engine. (Photo shown is of actual gasket)

If you are installing a Racing Beat Holley or Dellorto intake... Intake Gasket - Engine-to-Manf - 74-5/ 81-5 12A

Unflanged Collector Assembly

Unflanged Collector Assembly

Our Unflanged Collector Assembly allows additional flexibility in the assembly of either a long or short primary exhaust system. All three tubes are 2" O.D. mild steel tubing with a .125" wall thickness. Overall length is... Unflanged Collector Assembly

Go to Racing Beat Home Page
Select: Go to Shopping Cart