Early Rotary & 1975-85 Mazda RX-7 : Flywheels
Customers who bought the above item also often bought:
Flywheel Stopper Bar Tool
The Flywheel Stopper Bar Tool is normally required whenever the flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the flywheel (except Tilton) or the automatic transmission flex plate and prevents the... 
Flywheel Nut Wrench Tool
Having the correct tool always makes the job seem easy, right? Although you probably won't be using this tool much, it will certainly pay for itself even if you only use it once! The Flywheel Nut Wrench tool is used to remove or install the...
Auto Transmission Balance Weight Puller Tool
The Automatic Transmission Balance Weight Puller Tool will remove any automatic transmission balance weight from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This is the same balance weight used with all our...
Transmission Throwout Bearing - 89-92 RX-7 - All
The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of...
