
Early Rotary & 1979-85 Mazda RX-7 : Flywheels
Customers who bought the above item also often bought:

Flywheel Nut Wrench Tool
Having the correct tool always makes the job seem easy, right? Although you probably won't be using this tool much, it will certainly pay for itself even if you only use it once! The Flywheel Nut Wrench tool is used to remove or install the...

Flywheel Stopper Bar Tool
The Flywheel Stopper Bar Tool is normally required whenever the rotary engine flywheel retaining nut is being removed or installed. The Racing Beat Stopper Bar bolts to either the stock flywheel, the Racing Beat Flywheel, or equivalent (except Tilton) and...

Auto Transmission Counter Weight Puller Tool
The Automatic Transmission Counter Balance Weight Puller Tool will remove any automatic transmission balance weight from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This is the same balance weight used with all our...

Grinding Stone - Ball Shape
This grinding stone has the following specifications:
Grinding stone (ball-shaped) 1/8" shank diameter by 3 1/2" overall length (stone 1/2" diameter). Our experience has shown that an average of four (4) grinding stones are required...