Early Rotary & 1979-85 Mazda RX-7 : Fuel System

 : Fuel System : Mallory 4070M Fuel Pump

Mallory 4070M Fuel Pump

RB Part Number: 18150

Mallory
4070M

Price: $218.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Mallory 4070M Fuel Pump

The Mallory 4070M Fuel Pump (shown with optional regulator) is an ideal unit for use with the Holley and Weber carburetor units that we offer. The Mallory 4070M pump is a high-pressure, 12-volt fuel pump that delivers 70+ GPH (free flow) and contains an internal bypass regulator set at the Racing Beat recommended 6 PSI. This pump features 3/8" NPT thread sizes, and a 5/16" feed line is recommended. (Hose fittings are not supplied with this pump.)

If the vehicle will be used for racing applications, (especially drag racing) adding an optional return-style Mallory 4309 Regulator and blocking off the internal bypass in the pump (and allowing the pump pressure to increase) is recommended. (Blocking components are supplied with the 4309 regulator.) This set-up will greatly reduce the pressure drop off that can occur during sustained full-throttle runs. A 3/8" return fuel line is recommended for use with this regulator. (Hose fittings are not included.)

Racing Beat Recommended Accessories:

Mallory 4309 Fuel Pressure Regulator

Mallory 4309 Fuel Pressure Regulator

The Mallory 4309 return-style design pressure regulator (shown with optional fuel pump) extends the life of the fuel pump and eliminates pressure drop that can occur at high RPM "launch" starts. A high quality pressure regulator is a... Mallory 4309 Fuel Pressure Regulator

Go to Racing Beat Home Page
Select: Go to Shopping Cart