Early Rotary & 1979-85 Mazda RX-7 : Intake Holley Components

 : Intake - Holley Components : Holley Race Float Bowl Kit

Holley Race Float Bowl Kit
*

Part Number: 16641

Price: $268.00

Qty:

Holley Race Float Bowl Kit -  - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Holley Race Float Bowl Kit
*

The Holley Race Float Bowl Kit (two float bowls provided with the kit) will convert our regular 465 and 600 CFM carburetors to center pivot float bowls. These float bowls prevent excess fuel from entering the carburetor during full-throttle cornering, minimizing the sloshing of fuel into the throttle bores from the discharge nozzles.Kit includes gaskets and installation instructions.

These float bowls feature 5/8-18 NPT female fuel inlets. We've not found a commercially available "pre-made" fuel line that is compatible with both the carb and linkage assembly, we suggest you use a universal 90 degree or 180 degree 3/8" hose with 5/8x18 NPT inverted flare to configure your own fuel inlet assembly. Or, fabricate your own braided-hose assembly using Earl's (or comparable) components.

* Legal in California only for racing vehicles, which may never be used upon a highway.
  What does this mean? Click Frequently Asked Questions About Emission Laws And Regulations.

Racing Beat Recommended Accessories:

Holley Fuel Line Fitting - 3/8 Hose w/ 5/8-18 NPT Inverted Flare

Holley Fuel Line Fitting - 3/8 Hose w/ 5/8-18 NPT Inverted Flare

Holley Fuel Fitting - 90 Degree Universal 3/8" hose with 5/8-18 NPT Inverted Flare This fuel line fitting can be used on any Holley carburetor that features a 5/8-18 inverted flare intake port. We're a bit surprised at the price Holley... Holley Fuel Line Fitting - 3/8 Hose w/ 5/8-18 NPT Inverted Flare

Go to Racing Beat Home Page
Select: Go to Shopping Cart