Early Rotary & 1979-85 Mazda RX-7 : Ignition

 : Ignition : ULTRA Ignition Wires - Race 71-85 12A & 13B

ULTRA Ignition Wires - Race
71-85 12A & 13B

Part Number: 11513

Price: $127.00

Qty:

ULTRA Ignition Wires - Race - 71-85 12A & 13B - Detail 1ULTRA Ignition Wires - Race - 71-85 12A & 13B - Detail 2ULTRA Ignition Wires - Race - 71-85 12A & 13B - Detail 3

Addtional Photos - Select to Enlarge

Facebook Share

ULTRA Ignition Wires - Race
71-85 12A & 13B

Racing Beat's ULTRA 8mm wire sets for Street and Race-Application 1971-1985 12A and 13B engines are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 F to +480 F over exceptionally long periods. ULTRA Ignition wire sets have a wire wound resistor encapsulated in each spark plug boot. This feature reduces electromagnetic radiation.

 

To obtain reasonable horsepower gains while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires. To obtain maximum power gains from our ULTRA 8mm Race Ignition Wires, we recommend the use of non-resistor spark plugs.

Each wire set is assembled "in-house" by our Racing Beat technicians using the high quality ULTRA ignition components. Produced in Japan, these components are hand-assembled for each specific application that we offer. Each set is assembled and test to ensure correct resistance prior to final packaging. This custom assembly process provides us with complete control over the entire assembly procedure.

   

We offer ULTRA Ignition Wire sets for both street and race applications. Street wire sets combine excellent radio noise suppression with high performance (5k Ohm), while the race provides lower resistance (1k Ohm), but with substantial radio interference.

Assembled in the USA by Racing Beat, Inc.Assembled in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

NGK Spark Plug - BR7EIX City/Non-ported

NGK Spark Plug - BR7EIX City/Non-ported

For literally decades, Racing Beat has recommended NGK Spark Plugs for Street, High Performance, and Race rotary engine applications. The NGK B7EIX Spark Plug is recommended for non-turbo, non-ported, high performance rotary engines used... NGK Spark Plug - BR7EIX City/Non-ported

NGK Spark Plug - BR10EIX Racing

NGK Spark Plug - BR10EIX Racing

For literally decades, Racing Beat has recommended NGK Spark Plugs for Street, High Performance, and Race rotary engine applications. The NGK BR10EIX spark plug is recommended for use in non-turbo, street-ported, high performance rotary engines... NGK Spark Plug - BR10EIX Racing

Distributor Cap - 80-85 RX-7

Distributor Cap - 80-85 RX-7

We offer the genuine Mazda distributor cap for use on 1980-85 (all) electronic distributors. The Mazda part number for this cap is listed as 8245-24-310B-9U. If needed, the distributor rotor is also available.

Distributor Cap - 80-85 RX-7

Racing Beat Logo - 1x10 Red/Blue

Racing Beat Logo - 1x10 Red/Blue

This 1" x 10" Racing Beat vinyl decal can be applied to any smooth surface. Simply peel away the backing, position in place, rub out any air bubbles, and remove the overlay to securely mount this Racing Beat decal in the location of your... Racing Beat Logo - 1x10 Red/Blue