Early Rotary & 1979-85 Mazda RX-7 : Ignition

 : Ignition : ULTRA Ignition Wires 71-85 12A & 13B w/shields

ULTRA Ignition Wires
71-85 12A & 13B w/shields

Part Number: 11518

Price: $150.00

Qty:

ULTRA Ignition Wires - 71-85 12A & 13B w/shields - Detail 1ULTRA Ignition Wires - 71-85 12A & 13B w/shields - Detail 2ULTRA Ignition Wires - 71-85 12A & 13B w/shields - Detail 3

Addtional Photos - Select to Enlarge

Facebook Share

ULTRA Ignition Wires
71-85 12A & 13B w/shields

Racing Beat's ULTRA 8mm wire sets, with noise suppression shields, for street-application 1971-85 12A and 13B engines are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 F to +480 F over exceptionally long periods. ULTRA Ignition wire sets have a wire wound resistor encapsulated in each spark plug boot. This feature reduces electromagnetic radiation.

 

To obtain reasonable horsepower gains while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires. To obtain maximum power gains from our ULTRA 8mm Race Ignition Wires, we recommend the use of non-resistor spark plugs.

Each wire set is assembled "in-house" by our Racing Beat technicians using the high quality ULTRA ignition components. Produced in Japan, these components are hand-assembled for each specific application that we offer. Each set is assembled and test to ensure correct resistance prior to final packaging. This custom assembly process provides us with complete control over the entire assembly procedure.

   

We offer ULTRA Ignition Wire sets for both street and race applications. Street wire sets combine excellent radio noise suppression with high performance (5k Ohm,- 6k Ohm) while the race provides lower resistance (0k Ohm,- 1k Ohm), with substantial radio interference.

NOTE: Some aftermarket performance spark plugs have proven to be unacceptable in terms of manufacturing quality; specifically, these plugs develop compression leaks between the porcelain and steel subcomponents causing both premature spark plug boot failure and genuine horsepower losses. For this reason, we strongly encourage the use of the factory or Racing Beat's recommended spark plugs only for use with our wire sets.

Assembled in the USA by Racing Beat, Inc.Assembled in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Spark Plug - Stock - BR8EQ14 12A & 13B

Spark Plug - Stock - BR8EQ14 12A & 13B

For literally decades, Racing Beat has recommended NGK Spark Plugs for Street, High Performance, and Race rotary engine applications. The NGK BR8EQ14 spark plug is the Mazda factory-recommended spark plug for daily driving applications. This... Spark Plug - Stock - BR8EQ14 12A & 13B

Distributor Cap - 80-85 RX-7

Distributor Cap - 80-85 RX-7

We offer the genuine Mazda distributor cap for use on 1980-85 (all) electronic distributors. The Mazda part number for this cap is listed as 8245-24-310B-9U. If needed, the distributor rotor is also available.

Distributor Cap - 80-85 RX-7

Distributor Rotor - 80-85 RX-7

Distributor Rotor - 80-85 RX-7

We offer the genuine Mazda distributor rotor for use on 1980-85 (all) electronic distributors. The Mazda part number for this rotor is listed as 8245-24-303A-9U. If needed, the distributor cap is also... Distributor Rotor - 80-85 RX-7

Mazda OEM Oil Filter - RX7, RX8, Protege, Miata

Mazda OEM Oil Filter - RX7, RX8, Protege, Miata

This OEM Mazda Oil Filter is intended for use on RX-7, RX-8, Protege & Protege 5, and Miata applications. It is recommended that the oil filter be replaced at the same time of an oil change. This is the genuine Mazda oil filter and is listed as... Mazda OEM Oil Filter - RX7, RX8, Protege, Miata

Go to Racing Beat Home Page
Select: Go to Shopping Cart