Early Rotary & 1979-85 Mazda RX-7 : Intake Gaskets

 : Intake - Gaskets : Intake Gasket 84-85 13B Engine-to-Manifold

Intake Gasket
84-85 13B Engine-to-Manifold

Part Number: 16734

Price: $10.00

Qty:

Intake Gasket - 84-85 13B Engine-to-Manifold - Detail 1

Addtional Photos - Select to Enlarge

Facebook Share

Intake Gasket
84-85 13B Engine-to-Manifold

The 1984-85 13B Engine-to-Manifold Mazda Factory gasket is intended to fit securely between the intake manifold and the engine.

If you are installing a Racing Beat Holley or Dellorto intake manifold, two (2) Water O-rings are still required to seal the water passageways that were utilized in the stock manifold.

Genuine Mazda PartGenuine Mazda Part.

Customers who bought the above item also often bought:

Intake Gasket - Upper/lower - 84-85 13B GSL-SE

Intake Gasket - Upper/lower - 84-85 13B GSL-SE

The Mazda Factory Upper/Lower intake gasket sandwiches between the upper and lower stock intake manifold sections on a 1984-85 13B GSL-SE 6 Port engine and is also compatible with the Racing Beat Top Side draft Manifold... Intake Gasket - Upper/lower - 84-85 13B GSL-SE

Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

flange-gasket-guide.pdf

Engine-to-Header Gasket - 1984-92 13B 6-Port Engine - This gasket is required to mount when mounting a header or exhaust manifold to a 1984-92 13B (6-Port Intake) rotary engine, or a 20B 3-rotor... Engine-to-Header Gasket - 84-92 13B 6-Port Engine / 20B 3-Rotor Engine

Air Control/Check Valve - Cover Plate - 81-92 RX-7 - All Non-turbo

Air Control/Check Valve - Cover Plate - 81-92 RX-7 - All Non-turbo

Air Control and Check Valve Cover Plate - 1981-92 RX-7 12A and 13B Non-turbo - This plate will cover the opening that remains when the air control and check valve assembly is removed from the side of the stock 12A or 13B... Air Control/Check Valve - Cover Plate - 81-92 RX-7 - All Non-turbo

Holley Intake Manifold - 84-92 13B 6-Port Engine

Holley Intake Manifold - 84-92 13B 6-Port Engine

The Racing Beat-designed intake manifold for the 1984-92 13B 6-Port rotary engine is ideally suited to meet the performance requirements of the Holley carburetor. Designed by Chief Engineer/Engine Builder Jim Mederer, these cast aluminum intake... Holley Intake Manifold - 84-92 13B 6-Port Engine

Go to Racing Beat Home Page
Select: Go to Shopping Cart