Early Rotary & 1979-85 Mazda RX-7 : Oil System

 : Oil System : Oil Baffle Plate 74-85 13B Engines

Oil Baffle Plate
74-85 13B Engines

Part Number: 11824

Price: $60.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Oil Baffle Plate
74-85 13B Engines

The Racing Beat-designed and manufactured Oil Baffle Plate slows the return of engine oil as it drains from the engine into the pan. In slowing the oil's return, air that has been suspended in the oil (as foam) is allowed more time to separate from the oil.

Removing this trapped air both improves the ability of the oil to transfer heat and reduces pressure drops at high RPM. The plate is sandwiched between the engine and the oil pan. It is recommended that two oil pan gaskets be used, one below and one above the plate, to provide proper sealing. Gaskets are not supplied, but are available separately if needed.

Made in the USAMade in the USA by Racing Beat, Inc.

Customers who bought the above item also often bought:

Oil Pan Gasket - 74-85 13B Engine

Oil Pan Gasket - 74-85 13B Engine

Racing Beat offers the genuine Mazda factory gasket to replace a worn original gasket. Price is for one (1) gasket. For use on any 1974-85 13B engine application. Oil Pan Gasket - 74-85 13B Engine

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

The Racing Beat-designed Double Sheave Aluminum Alternator Pulley reduces alternator RPM approximately 20% from stock RPM, and is intended for high performance and moderate race use. It is compatible with either the stock main pulley, or assuming you are... Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Oil Hose Adapter Fitting - 18MM to -10 Hose

Oil Hose Adapter Fitting - 18MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 18mm female metric threads in the rear housing to accept -10 hose ends. Additionally, these 18mm female fittings also fit the 1986-1992... Oil Hose Adapter Fitting - 18MM to -10 Hose

Oil Pressure Regulator - Street 80-85 PSI

Oil Pressure Regulator - Street 80-85 PSI

The Racing Beat high performance Rear Oil Pressure Regulator is designed for use on all 1971-1992 12A, 13B, and 20B engines and interchanges exactly with the stock unit. As supplied by Mazda, the factory pressure regulator is intended to bypass at maximum... Oil Pressure Regulator - Street 80-85 PSI

Go to Racing Beat Home Page
Select: Go to Shopping Cart