Early Rotary & 1979-85 Mazda RX-7 : Engine Porting & Assembly Tools

 : Engine - Porting & Assembly  Tools : Devcon Plastic Putty Steel

Devcon Plastic Putty
Steel

Part Number: 19994

Price: $82.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Devcon Plastic Putty
Steel

When building a peripheral port engine it is necessary to fill the intake ports on the cast iron side housings with a material that will form a tough, durable metallic mass - Devcon Plastic Steel Putty (10110) is the material of choice. Easy to use and requiring minimal clean up, Devcon cures at room temperature. Each container of Devcon will be sufficient to complete several engines.

(Hylomar product shown in photo is not included.)

Customers who bought the above item also often bought:

Porting Template - J-Bridge Intake Port 12A & 13B

Porting Template - J-Bridge Intake Port 12A & 13B

The Racing Beat Intake Port Templates allow you to undertake your own "J-bridge" port efforts on any 12A or 13B rotary engine (except 13B 6-port). These templates are traced from Racing Beat's own master templates, which are the result of... Porting Template - J-Bridge Intake Port 12A & 13B

Road Race Header - Outlet Flange - Steel

Road Race Header - Outlet Flange - Steel

flange-gasket-guide.pdf This laser-cut flange can be used to fabricate a custom exhaust for use with the Racing Beat Road/Race Header. This two-hole flange measures 6" X 2-13/16" and features two 2" openings. This is the same... Road Race Header - Outlet Flange - Steel

Mazda Race Rotor Bearing - 12A & 13B

Mazda Race Rotor Bearing - 12A & 13B

The Mazda Factory Race (MFR) rotor bearings for all 12A & 13B engines are the best bearings available of engine operation near or above 8500 RPM. The rotor bearings are manufactured with a deep groove for additional oil storage and offer an... Mazda Race Rotor Bearing - 12A & 13B

3/8-in Brass NPT Adapter

3/8-in Brass NPT Adapter

This AutoMeter adaptor (ATM-2263) can be used to fit a 5/8"-18 UNF gauge fitting (as supplied on Auto Meter Mechanical Temperature Gauges) onto the 3/8" NPT sensor position on the Racing Beat TYPE II Oil/Pressure Temperature unit. Sold... 3/8-in Brass NPT Adapter

Go to Racing Beat Home Page
Select: Go to Shopping Cart