Early Rotary & 1979-85 Mazda RX-7 : Engine Porting & Assembly Tools

 : Engine - Porting & Assembly  Tools : Carbide Cutting Tool A Bridge Porting

Carbide Cutting Tool A
Bridge Porting

Part Number: 22100

Price: $19.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Carbide Cutting Tool A
Bridge Porting

This carbide cutting tool has the following specifications:
Shank Diameter: 1/8"
Shank Length: 2 3/8"
Cutter Diameter: 1/8"
Cutter Length: 5/8"

We've taken the guess work out of selecting the appropriate cutting and grinding tools to undertake your engine porting effort. In this section of our web catalog we offer a wide selection of tools that you can select from; refer to the following guide for the quantity and type of cutting tools that are required for a specific porting application. Grinding Tool Application Guide. These select tools are the same tools that the Racing Beat technicians use to perform the various porting tasks required in development of racing and prototype engines. Selected to provide optimum efficiency for use in your porting efforts, each cutting tool is top-quality, quick-cutting and can be resharpened after extended use. When using a cutting tool you MUST use an appropriate cutting lubricant (i.e. Saw Wax) or damage to the cutting tool will occur.

Customers who bought the above item also often bought:

Carbide Cutting Tool B - Bridge Porting

Carbide Cutting Tool B - Bridge Porting

This carbide cutting tool has the following specifications:
Shank Diameter: 1/8"
Shank Length: 2 7/16"
Cutter Diameter: 1/8"
Cutter Length: 9/16"

We've taken the guess work out of... Carbide Cutting Tool B - Bridge Porting

Grinding Stone - Ball Shape

Grinding Stone - Ball Shape

This grinding stone has the following specifications:
Grinding stone, ball shaped, 1/8" shank diameter by 3 1/2" overall length (stone 1/2" diameter). Our experience has shown that an average of four (4) grinding stones are... Grinding Stone - Ball Shape

Sandpaper Strip - 220 Fine Grit - Roll

Sandpaper Strip - 220 Fine Grit - Roll

These sandpaper strips have the following specifications:
Sandpaper strip roll 220 (fine) grit- This roll is 1" wide and 24" long. Intended for use with the sandpaper mandrel.

We've taken... Sandpaper Strip - 220 Fine Grit - Roll

Carbide Cutting Tool D

Carbide Cutting Tool D

This carbide cutting tool has the following specifications:
Shank Diameter: 3/16"
Shank Length: 1 3/8"
Cutter Diameter: 3/16"
Cutter Length: 5/8"

We've taken the guess work out of... Carbide Cutting Tool D

Go to Racing Beat Home Page
Select: Go to Shopping Cart