Early Rotary & 1979-85 Mazda RX-7 : Engine Porting & Assembly Tools

 : Engine - Porting & Assembly  Tools : Carbide Cutting Tool D

Carbide Cutting Tool D

Part Number: 22103

Price: $19.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Carbide Cutting Tool D

This carbide cutting tool has the following specifications:
Shank Diameter: 3/16"
Shank Length: 1 3/8"
Cutter Diameter: 3/16"
Cutter Length: 5/8"

We've taken the guess work out of selecting the appropriate cutting and grinding tools to undertake your engine porting effort. In this section of our web catalog we offer a wide selection of tools that you can select from; refer to the following guide for the quantity and type of cutting tools that are required for a specific porting application. Grinding Tool Application Guide. These select tools are the same tools that the Racing Beat technicians use to perform the various porting tasks required in development of racing and prototype engines. Selected to provide optimum efficiency for use in your porting efforts, each cutting tool is top-quality, quick-cutting and can be resharpened after extended use. When using a cutting tool you MUST use an appropriate cutting lubricant (i.e. Saw Wax) or damage to the cutting tool will occur.

Customers who bought the above item also often bought:

Grinding Stone - Ball Shape

Grinding Stone - Ball Shape

This grinding stone has the following specifications:
Grinding stone, ball shaped, 1/8" shank diameter by 3 1/2" overall length (stone 1/2" diameter). Our experience has shown that an average of four (4) grinding stones are... Grinding Stone - Ball Shape

Sandpaper Roll 3/8 OD - 220 Fine Grit

Sandpaper Roll 3/8 OD - 220 Fine Grit

Sandpaper Roll - 220 grit (fine), 3/8" OD x 1.5" L - This sandpaper roll is intended for use with both the long and short mandrels that we offer.

We've taken the guess... Sandpaper Roll 3/8 OD - 220 Fine Grit

Carbide Cutting Tool B - Bridge Porting

Carbide Cutting Tool B - Bridge Porting

This carbide cutting tool has the following specifications:
Shank Diameter: 1/8"
Shank Length: 2 7/16"
Cutter Diameter: 1/8"
Cutter Length: 9/16"

We've taken the guess work out of... Carbide Cutting Tool B - Bridge Porting

Sandpaper Roll Mandrel - Long

Sandpaper Roll Mandrel - Long

This sandpaper roll "long" mandrel tool has the following specifications:
1/4" shank diameter by 5" overall length (1/8" pilot). This mandrel is intended for use with all 1/2" and 3/8" OD sandpaper rolls... Sandpaper Roll Mandrel - Long

Go to Racing Beat Home Page
Select: Go to Shopping Cart