Early Rotary & 1975-85 Mazda RX-7 : Suspension - Components

: Suspension - Components : Racing Beat End Link Bushings 79-85 RX-7 Rear

Racing Beat End Link Bushings
79-85 RX-7 Rear

Part Number: 95240

Price: $2.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Racing Beat End Link Bushings
79-85 RX-7 Rear

These urethane bushings are offered as direct replacements for the bushings that were originally supplied with the Racing Beat rear sway bar for the 1979-85 RX-7. If you need replacement bushings/endlinks for the STOCK endlinks, we suggest the replacement Energy Suspension Front Endlink Set as a suitable replacement.

For additional replacement bushings, check the chart below for your specific application and part number. All bushings are sold individually, eight (8) required per bar. (Four per endlink assembly) We also offer specially formulated Prothane grease to lubricate the surface between the sway bar and bushing. One tube required per bar.

Bushing Part No.
(Bushings Sold Individually)		 Racing Beat Sway Bar Part No. & Vehicle Application
(2 Bushings Required Per Sway Bar)
95240
Endlink Bushing		 14100 - 1979-85 RX-7 Front Endlink (4 per side = 8 total)
14102 - 1979-85 RX-7 Rear Endlink (4 per side = 8 total)
95243 14102 - 1979-85 RX-7 Sway Bar - Rear
95246 14100 - 1979-85 RX-7 Sway Bar - Front
14103 - 1986-92 RX-7 Sway Bar - Front
54103 - 1999-00 Miata Sway Bar - Front
54104 - 1990-93 Miata Sway Bar (Tubular) - Front
54105 - 1994-97 Miata Sway Bar (Tubular) - Front
54107 - 1990-97 Miata Sway Bar - Race Front
95258 14104 - 1986-92 RX-7 Sway Bar - Rear
54101 - 1990-05 Miata Sway Bar - Rear
95828 14109 - 2006-08 RX-8/MX-5 Sway - Rear
54109 - 2006+ MX-5 Sway Bar - Rear
95991 54108 - 2006+ MX-5 - Front
95992 74103 - 2010+ Mazda 3 - Front
95993 74102 - 2007-09 Mazda 3 Sway Bar - Rear
95995 70100 - 2003-08 Mazda 6 Sway Bar - Front
74100 - 2004-09 Mazda 3 Sway Bar - Front
95996 70101 - 2003-08 Mazda 6 Sway Bar - Rear
74101 - 2004-06 Mazda 3 Sway Bar - Rear
74104 - 2010+ Mazda3 Sway Bar - Rear
95997 14106 - 1993-95 RX-7 Sway Bar - Rear
14109 - 2004-05 RX-8/MX-5 Sway Bar - Rear
96007 14107 - 1993-95 RX-7 Sway Bar - Front
14108 - 2006-08 RX-8 Sway Bar - Front
54106 - 2001-05 Miata Sway Bar - Front
96008 54100 - 1990-93 Miata Sway Bar (Solid) - Front
54102 - 1994-97 Miata Sway Bar (Solid) - Front

Customers who bought the above item also often bought:

Weber Carb - 48 IDA - Down Draft

Weber Carb - 48 IDA - Down Draft

Both the elegant design and the simplicity in the maintenance of the WEBER 48 IDA Carburetor have proven to be compelling reasons as to why the Weber name has remained so popular over the years.

This Weber 48 IDA unit is primarily suited...

Race Apex Seal Spring - 86-92 Non-Turbo

Race Apex Seal Spring - 86-92 Non-Turbo

Our Racing Beat Race Apex Seal Springs, specifically designed to fit the underside of our 1986-92 Non-Turbo (2mm) Race Apex Seals, provide proper pre-loading for these lighter one-piece seals. Unlike the stock inner and outer dual apex seal spring...

Carbon Race Apex Seal - 86-92 Non-Turbo

Carbon Race Apex Seal - 86-92 Non-Turbo

Racing Beat's 1986-92 13B Non-Turbo (2mm) Carbon Race Apex Seals are specifically designed to replace the stock cast iron apex seals in rotary engines operating near, or above, 8,500 RPM. These aluminum-filled carbon apex seals are a one-piece...

Road/Race Header Outlet Flange

Road/Race Header Outlet Flange

This laser-cut flange can be used to fabricate a custom exhaust for use with the Racing Beat Road/Race Header. This two-hole flange measures 6" X 2-13/16" and features two 2" openings. This is the same flange that comes included on Racing Beat...

Go to Racing Beat Home Page
Select: Go to Shopping Cart