Early Rotary & 1979-85 Mazda RX-7 :

 :  : Racing Beat End Link Bushings 79-85 RX-7 Rear

Racing Beat End Link Bushings
79-85 RX-7 Rear

Part Number: 95240

Price: $2.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Racing Beat End Link Bushings
79-85 RX-7 Rear

These urethane bushings are offered as direct replacements for the bushings that were originally supplied with the Racing Beat rear sway bar for the 1979-85 RX-7. If you need replacement bushings/endlinks for the STOCK endlinks, we suggest the replacement Energy Suspension Front Endlink Set as a suitable replacement.

For additional replacement bushings, check the chart below for your specific application and part number. All bushings are sold individually, eight (8) required per bar. (Four per endlink assembly) We also offer specially formulated Prothane grease to lubricate the surface between the sway bar and bushing. One tube required per bar.

Bushing Part No.
(Bushings Sold Individually)
Racing Beat Sway Bar Part No. & Vehicle Application
(2 Bushings Required Per Sway Bar)
95240
Endlink Bushing
14100 - 1979-85 RX-7 Front Endlink (4 per side = 8 total)
14102 - 1979-85 RX-7 Rear Endlink (4 per side = 8 total)
95243 14102 - 1979-85 RX-7 Sway Bar - Rear
95246 14100 - 1979-85 RX-7 Sway Bar - Front
14103 - 1986-92 RX-7 Sway Bar - Front
54103 - 1999-00 Miata Sway Bar - Front
54104 - 1990-93 Miata Sway Bar (Tubular) - Front
54105 - 1994-97 Miata Sway Bar (Tubular) - Front
54107 - 1990-97 Miata Sway Bar - Race Front
95258 14104 - 1986-92 RX-7 Sway Bar - Rear
54101 - 1990-06 Miata Sway Bar - Rear
95828 14109 - 2006-11 RX-8/2006-15 MX-5 Sway - Rear
54109 - 2006-15 MX-5 Sway Bar - Rear
95991 54108 - 2006-15 MX-5 - Front
95992 74103 - 2010-13 Mazda 3 - Front
95993 74102 - 2007-09 Mazda 3 Sway Bar - Rear
95995 70100 - 2003-08 Mazda 6 Sway Bar - Front
74100 - 2004-09 Mazda 3 Sway Bar - Front
95996 70101 - 2003-08 Mazda 6 Sway Bar - Rear
74101 - 2004-06 Mazda 3 Sway Bar - Rear
74104 - 2010-13 Mazda3 Sway Bar - Rear
95997 14106 - 1993-95 RX-7 Sway Bar - Rear
14109 - 2004-05 RX-8 - Rear
96007 14107 - 1993-95 RX-7 Sway Bar - Front
14108 - 2006-08 RX-8 Sway Bar - Front
54106 - 2001-05 Miata Sway Bar - Front
96008 54100 - 1990-93 Miata Sway Bar (Solid) - Front
54102 - 1994-97 Miata Sway Bar (Solid) - Front

Customers who bought the above item also often bought:

Prothane Super Grease

Prothane Super Grease

We offer packets of Prothane Super Grease for use on any urethane bushing component. These are same packets that we supply with our sway bar kits. Each packet can be used to lubricate at least one sway bar. Price is for one (1) pack.

Prothane Super Grease

Front Sway Bar Bushing - 1.125-inch ID diameter

Front Sway Bar Bushing - 1.125-inch ID diameter

These urethane bushings are offered as direct replacements for the bushings that were originally supplied with your Racing Beat sway bar. Check the chart below for your specific application and part number. All bushings are sold individually,... Front Sway Bar Bushing - 1.125-inch ID diameter

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

The Racing Beat-designed Double Sheave Aluminum Alternator Pulley reduces alternator RPM approximately 20% from stock RPM, and is intended for high performance and moderate race use. It is compatible with either the stock main pulley, or assuming... Aluminum Alternator Pulley -Double Sheave - 74-92 Rotary Engines (All)

Oil Hose Adapter Fitting - 16MM to -10 Hose

Oil Hose Adapter Fitting - 16MM to -10 Hose

We offer the Racing Beat Oil Cooler Hose Adapter Fittings to simplify oil system plumbing. These fittings adapt the 16mm female metric threads in the front cover (1971-95 rotary engines) and oil cooler (1971-85 stock or factory race) to accept -10... Oil Hose Adapter Fitting - 16MM to -10 Hose

Go to Racing Beat Home Page
Select: Go to Shopping Cart