1986-92 Mazda RX-7 Performance Parts : Clutch/Pressure Plate

 : Clutch/Pressure Plate : Street/Strip HD Clutch Disc 83-92  Non-Turbo

Street/Strip HD Clutch Disc
83-92 Non-Turbo

Part Number: 12510

Price: $157.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

Street/Strip HD Clutch Disc
83-92 Non-Turbo

The Street/Strip HD (Heavy Duty) 225mm Clutch Disc for the 1983-92 Non-Turbo RX-7s is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the clutch plate.

The result is a disc that engages quicker (requiring a bit more technique when starting) and releases quicker (making life easier for the transmission synchros). This disc is well suited for high output street engines and interchanges exactly with the stock disc. It can be used with either a stock pressure plate or our Street/Strip Pressure Plate. As with all of our products, it is built only from new parts.

Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage. (See bottom of parts list).

WARNING: None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.

Customers who bought the above item also often bought:

Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Our Exedy Street/Strip Pressure Plate, intended for the 1983-92 RX-7 12A & 13B (6-Port Non-Turbo) chassis, is designed for high-performance street applications and for occasional drag or road racing. A stronger diaphragm spring applies... Street/Strip Pressure Plate - 83-92 12A/13B 6PT

Clutch Alignment Tool - 71-92 All non-turbo engines

Clutch Alignment Tool - 71-92 All non-turbo engines

This clutch disc alignment tool simplifies clutch installation on all 1971-92 12A and 13B non-turbo rotary engines by aligning the clutch disc splines with the eccentric shaft pilot bearing. Although you'll likely use this tool only once or... Clutch Alignment Tool - 71-92 All non-turbo engines

Transmission Throwout Bearing - Pre-79 12A & 13B

Transmission Throwout Bearing - Pre-79 12A & 13B

The Transmission Throwout Bearing Retaining Spring is required to secure the throwout bearing on pre 1979 12A & 13B applications. Transmission Throwout Bearing - Pre-79 12A & 13B

Exhaust System Tubing - 2.5-inch OD Steel

Exhaust System Tubing - 2.5-inch OD Steel

Exhaust System Tubing - 2.5" OD - We offer tubing in 4-foot lengths for custom exhaust applications. The tubing is 2.5" OD, .120" wall thickness, hot-rolled electric welded (HREW), flash controlled, mild steel. Priced per 4-foot... Exhaust System Tubing - 2.5-inch OD Steel

Go to Racing Beat Home Page
Select: Go to Shopping Cart